Switching

If somebody can confirm if it is supported on ISR 1100 series. The features navigator does not mention it nor the configuration guides.

I try configure old Cisco 877M. Yes, I know, it is old product. But, no idea byu new and make just same steps and found same problem. I want use 877M as router. WAN is 4G-modem. LAN is my home-office-mini-network. 4G modem is connected to FE0. Config...

Hello, We are in the process of upgrading a few of our Catalyst switches to Nexus switches, and I was wondering what the best/easiest way to copy the configs from switch to switch would be? The switches are:3560->93180-FX3750->93180-FX3750->93180-FX ...

Hi Community I require an IEC Test Report for the Cisco 2960 switches - can anyone help ? thanks in advanceManjit 

a very basic question:inside a single LAN/VLANI shhould create only one IP subnet.What are the contraindications in creating more than 1 subnet in a single LAN(VLAN ?

I've got 4 switch stacks setup in a hub and spoke. Each spoke has a LACP connection using 2 fiber connections to the hub. I seem to be having an issue where my monitoring VM can't see certain devices even though they are online and can be pinged from...

Right, I am pretty new to networking and I got this assignment where there are 3 existing departmental teams that will be relocating to the new building. An IT team, a Marketing team and a HR team. There are 3 floors within the building which will be...

Hey guys. I'm still in the early stages of this stuff. I have a Cisco 1841 router double NATing from my ISP router. My 1841 router is then connected to switch 1 via Fa0/1. Switch 1 is connected to switch 2 via Fa0/13 on both switches.I trunked it. So...

Hi, I wonder if it's possible to se send syslogs to a remote server via TCP with a specific port (that I choose), instead of the default UDP port 514?The switches är Nexus 5000, 7000, 9000 and ACI platforms. We don't find anything about that in the c...

I have been trying to figure out 3850 / 3650 CPU queue traffic with not much success. I have a couple of 3850/3650 that are dropping traffic punted to the CPU. For example, on a 3650 I have traffic punted to the CPU from FED for SW forwarding queue a...

I manage IT for a small company with a 3064-T 10gig ( N3K-C3064TQ-32T ) switch that runs the core. The rest of the network is all edge switches that are 2960x. As i said, one switch runs the core of the network. This makes it difficult to do any work...

Is there a way to change the default key length that is created when using autonetkit? it defaults to 512 which is a problem when trying to ssh from an ubuntu VM. to resolve I have to recreate the rsa key at a min of 1024.  Is there a way to fix this...