Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Labels

Forum Posts

Hi, have this issue with FW  2.4.5.71. Thanks Henri 21474770222019-Feb-01 09:04:41Alert%STCK SYSL-A-UNITMSG: UNIT ID 1,Msg:%HAL_db-F-BOXCovIfUnitFailed: HALC_db_convert_ifIndex_to_unit_id: ifIndex 0 BOXG_convert_ifIndex_to_unit_id Failed *****  FATAL...

Hello, Can anybody clarify if the operation of Smart Licensing on switches has dependence on Call Home service? is Call Home mandatory in order to use Smart Licensing? What I read in the switch configuration guide:https://www.cisco.com/c/en/us/td/doc...

Hi all,i have a strange issue regarding two 6509-E that form my core network. Actually there is a Etherchannel with PAgP protocol between them, without VSS.The TenGig ports of the Standby Hot supervisor of the switch A are connected to the TenGig por...

HI everyone,  Having issues with a multicast network, the high level design is:2-6505s in a VSS (core switch)all VLAN interfaces are on the core switchSVI routingip multicast routing is enabledAll VLANs have ip pim sparse-dense mode enabledRP = 10.X....

Hello For the last couple of days, I'm getting these errors in a dual chassis 6880 environment (VSS)  469486: Mar 22 13:57:45.235: %EARL-SW2_DFC1-1-EXCESSIVE_PARITY_ERROR: EARL 0: Parity error detected in VRAM469487: Mar 22 13:57:47.975: %EARL-SW2_...

I need a document describing the mechanism of Symmetric Hashing in LACP at Nexus.There is no information as the second switch understands that it needs to return a packet on the same link. Are there any restrictions for use ?I Need to organize a bond...

Maxxic by Level 1
  • 711 Views
  • 0 replies
  • 0 Helpful votes

I am very nice to network design so please bare with me. I have an Network IP address of 128.112.48.0/22 because my network need to hold 1000+ devices. What would the vlan 10, vlan 20 and vlan 30 but for that. I know 192.168.10.0= vlan 10 and 192.168...