Switching

Hi Guys,One of the module in cisco nexus 7010 suddenly restarted,2014 Nov 21 11:47:39 WIB MASTER %MODULE-2-MOD_NOT_ALIVE: Module 3 not responding... resetting (Serial number: JAF1612ASPA)2014 Nov 21 11:47:50 WIB MASTER %PLATFORM-2-MOD_DETECT: Module ...

Hello everyone, i am currently doing my apprenticeship in IT, which got me to do a little project.   I want to do MAC-filtering in my test environment and in order to do so i want to use a Ubuntu Server, runnig FreeRadius, as VMPS Server for my Switc...

Hello Team,   I have couple of Cisco Gear at my working Place,  I want to know how to upgrade IOS by all possible ways:   1. Commands to update from console cable? 2. commands to update by  TFTP server? 3. 4506 IOS is not available on Cisco site inst...

Hello,   I work with Cisco CSRs.  On all of my previous CSRs in AWS, I have the following:   AWS-ENV-CSR-R1#sh run | in ip routeip route 0.0.0.0 0.0.0.0 Tunnel1ip route 0.0.0.0 0.0.0.0 Tunnel2 2 AWS-ENV-CSR-R1#sh ip cef 1.2.3.40.0.0.0/0 attached to T...

We have a Tranisition network switch we'd like to setup a trunk to to a cisco switch.  The tranistion networks switches uses pvids.  I don't fully understand this but think it is the same as the cisco native vlan.  I've tried configuring on both ends...

Dear All for couple of days i've been fighting with ARP input drops & throttles on interfaces of the customer VSS (SUP-2T+69XX&68XX LCs). I was able to avoid of any throttles on the interfaces (with hold-queue in incrementing) of the system, which im...

Hi All,Is there anyone experienced deploy OTV using ASR 1001 between 2 datacenters? We want to acquire HSRP localization there, but at this moment I can only see lots docs are saying how to do this on N7K, not ASR. I saw it has a FHRP filtering enabl...

I have Cisco 2500 Series Router that was configured by a Previous IT Guy and when it reboots it said (Cisco Controller)> I can't get out of it I have already reset it, I need to get it back to factory defaults, any help would be greatly appreciated. 

I hope i can get some help with this, we have setup a Cisco 1941 with dual wan we are having issues getting the router to fail over to the second line with a route map, if anyone could give some pointers that would be great. Config attached    When w...

I am looking to add 2 Gig ethernet ports into one of the card slots of the cisco 3900 router. I was given the following two part numbers and these look like serial ports NM-1T3/E3 or Vwic3-2MFT T1/E1. Comments please

Hi All,I would like to connects C9500-40X-A to C9300-NM-8-10G switches. May I know whether C9500-40X-A supports 10GB SFP+ transceivers? If so, which model should I go for? Thanks!

wat the common problems affecting in a STP and VLAN...wat all are the solution we needed for that..

it's Possible ??   need to use fabricpath over OTV  interconnect DC1 and DC2 site  (N7k) Example : fabric path connect to layer 2 switch for decap fabric and sent to OTV encapsulation ? 

Hi,   I have a local span setup as below. What I would like to know is what is the difference between the two options are: source vlan 100 & filter vlan 100? I want to SPAN all traffic on VLAN100.   session 1---------------description           : SPA...