Switching

Hello people, I had a problem with WS-C4506-E last Saturday. There are these logs: %VSLP-3-VSLP_LMP_FAIL_REASON: Te1/1/1: Link downFeb 25 21:24:47.515: %VSLP-2-VSL_DOWN:   All VSL links went down while switch is in ACTIVE roleFeb 25 21:24:47.515: %EC...

We are implementing ISE enforcement and as part of the process we are doing a shut/no shut on the switch ports.  We are experiencing problems with HP thin clients loosing network connectivity after this that require a physical power reboot to fix. A...

Dear All, I am planning to setup a windows domain network most probably in windows server 2016 with about 30 user in main office and about 30 users in 3 different cities. Please suggest me network equipment such as switches, routers, firewall etc. fo...

Hi everyone, I have a logic diagram as below: PC ----L3- C3850 ------trunk link ------L3- C3650--- ----SWL2  PC can ping/telnet to C3850, and SWL2 but cannot ping to C3650. If I want to telnet to C3650, I have to telnet to C3850 first and to C3650...

Hi,      kindly someone give me the answer of this question and also brief description about correct answer. Question: Which statements correctly define ACLs? A. They can only be used on routers B. They are used as a classification tool C. They iden...

Currently Nexus 7010 already has 1 supervisor  module version 6.2(16). Looking for information regarding installing a second redundant module. Question: Does it automatically sync software/license/config etc. from active sup to new sup or one have to...

Hi, Can you help me on this one? I have recently installed the WAN serial module for our router and this happens: System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)Technical Support: http://www.cisco.com/techsupportCopyright (c) 2012 by c...

Hello Everyone, Would you'll please look into this query and help me out. I want to configure trunk between Cisco Catalyst-3560-CX Series Switch (Layer 3 Switch) which has 12 Gigabit ethernet ports & HP Procurve 2510-48 Switch (Layer 2 Switch) which ...

I have two switches, switch A is TACAS authentication with ACS, if it is failed, then check local authentication, also enabled with telnet, local user id: user1, password user1 and login local now I use another switch to telnet into this switch A and...

Does anyone know what these signify? Poking through the SNMP MIB, I can see: CISCO-STACK-MIB::moduleHwVersion.xxxx ENTITY-MIB::entPhysicalHardwareRev.xxxx I'm reporting on these and particularly examining the output for my flock of Cat2960X.  I have ...

Need help with cpu usage. im seeing more then usual usage. i have sorted the usage below.CPU utilization for five seconds: 53%/10%; one minute: 54%; five minutes: 54% PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process 254 47650988 175210481 27...

i need some help configuring a cisco 2960 from wagon wheel to daisy chain configuration. I will be daisy chaining two switches together via SFP SW MM module. this for a video streaming system. Here is the original switch configuration: enable conf t...