HiSince IOS Migration (c3560e-ipbasek9-mz.150-2.SE7.bin) i'v few PLATEFORM-CRASH on my switch 3560EHere the attachement file of plateform crash Could you help me please ?? Julien
HiSince IOS Migration (c3560e-ipbasek9-mz.150-2.SE7.bin) i'v few PLATEFORM-CRASH on my switch 3560EHere the attachement file of plateform crash Could you help me please ?? Julien
Hello everyone,We use RSTP to build redundancy topology with Cisco and vender A switches as the attached.In the test we found RSTP conversion time takes twice time when we manually set path cost in both side of the link.We have never seen this behavi...
we setup a switch for the server team to have LACP team ports for their Teamed nics in the servers.on a few servers, the server team did not setup teaming on their nics and connected the nics to the switch teamed ports. the switch connected each nic...
Hi i have the one problem i do not know why ibgp is better than ospf sh ip route 192.168.7.0Routing entry for 192.168.7.0/24 Known via "bgp 65178", distance 200, metric 110, type internal Last update from 10.66.2.5 00:03:03 ago Routing Descriptor...
I am facing a issue with CISCO 6509E switch with high CPU utilization. it reaches to 65%-70% which usually reaches 20 to 30%.
I have just set up a cisco SG300 switch with 2 vlans. The switch is in layer 3 mode and is handling routing between the vlans.The inter-vlan routing is working as computers can ping other computers on other vlans.However, I am unable to access a shar...
Hi friends , access-list 102 permit udp host 192.168.80.10 any eq 7 ip directed-broadcast 102 1 ) Why we do not need to specify a direction ( in or out ) when an access list associated with directed-broadcast ( ip directed-broadcast 102) command . ...
HiI have Cisco1801/K9 routers and we can monitor it only via PING, as when we monitor it via the SNMP it works for 30-45 minutes and then drop happens. From my management PC, I randomly get don’t fragment” message with both success and failure.I init...
Hi guys, I got an issue configuring Private-VLans on a cisco 2975 i know that it's not supported but it's there a way that i can configure a switchport on a Cisco 2975 switch and be able to communicate witch a Private-VLan on a 3750 switch
Hello guys,I´m just wondering if it´s possible to stack these two models of switch together. Tks!
I'm probably overlooking an easy fix for this but how can i use 2 links to the internet for different parts of my network? My network kinf od looks like this:(SW)--(R1)--(R2)--(R3)--(SW)--(FW)Right now the Firewall (FW) has OSPF running and redistrib...
How many instance of HSRP group I can configure in Cisco Catalyst 3850 and 4500X ?PS.: I want know the maximum limit of instance and not the range of group number, If possible, post the link of the documentation. Thanks.
Hi all,It was all good while i am reading Classful IP and Subnetting in which host bits are borrowed to create further subnets until I chance upon the CIDR/VLSM topic.Over here, I saw this diagram below whereby a Class C IP (192.168.1.x) is having a ...
Hi all,I have heard about port trunking providing high availability and combined bandwidth. Can I check the followingq1) if i trunk 2 ports together on my Ethernet card in my host computer, do I have to do the same on the ports in the network switch ...
Hi all,I always thought VLAN separate broadcast domain, and create "virtual" LANs across 1 physical switch.Also, it is a configuration to be done on the network switch side, any packet that goes into a VLAN interface, will be tagged automatically acc...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
10-16-2024 12:15 PM | ||
10-15-2024 03:13 AM | ||
10-14-2024 02:50 AM | ||
10-09-2024 11:22 AM | ||
10-08-2024 08:34 PM |
User | Count |
---|---|
8 | |
7 | |
6 | |
6 | |
6 |