Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Get 20% off switches when you combine Cisco solutions

 
Labels

Forum Posts

Ask Me Anything Event   Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from  Monday, November 4, 2024 through Friday, November 15, 2024. Our colleagues Rohit Chopra, Vaibhav Aggarwal, Anuraag Majumdar, Saquib Zeya...

rohit.png Vaibhav Aggarwal.png anuu.png Saquib Zeya.png

Hi,My network consists of 2 sites (A & B). Both sites each have 2 units of Cisco 6506 switches. Between Core1 & Core 2 both  are running HSRP.All the active gateways are at Core 1 & standby at Core 2. Both sites are connected via DWDM which physicall...

ganeshp by Level 1
  • 606 Views
  • 1 replies
  • 0 Helpful votes

Hello All.  I may be trying to fix something that isn't broke, but here goes :I have 2 access switches, both 6500's - Sup 720's, connected by gig fiber, trunked.  Switch A is our LAN switch, while Switch B is in our server room.  A is connected to th...

If a switch running VTP v2 boots with VTP server mode in the vlan.dat and VTP transparent mode in the startup-config and in the startup-config are configured some extended-range VLANs, is it possible to have a VTP server with extended-range VLANs con...

I have a customer considering the ramifications of not covering their C6509 chassis (243 in the core) and do hot spare scenario.  What are the IOS entitlements for C6509 that are not covered by a maintenance contract?  I would also like to do a compa...

breblack by Level 1
  • 323 Views
  • 1 replies
  • 0 Helpful votes

Resolved! Redundancy sso

Hello All,I have  following configuration on my swtich but i am unable to understande notification-timer 240000 command. Can you please help me to know what deos this do?redundancy notification-timer 240000 main-cpu  auto-sync startup-config mode sso...

Hi AllI have a C877 router that i would connect to a telia (big ISP of sweden) adsl connection. The router should recieve a dynamic ip address on the ATM interface.From the ISP i get this information on what to configureRouterEnet/Encap, routing, LLC...

I'm getting alerted by ciscoworks DFM that one of our etherchannel interfaces on a 6509 switch has a high discard rate. This is the event:EVENT DESCRIPTION = HighDiscardRate::Component=IF-172.17.6.253/78 [Po4] [172.16.14.149];Type=PROPVIRTUAL;...

niro by Level 1
  • 7064 Views
  • 12 replies
  • 0 Helpful votes

Hi every body.Let say we have enabled forwarding of broadcast on our router.  Please consider the following routing table.R  10.0.0.0/8 via s0R 10.0.0.0/16 via  s1R 10.10.10.0/24 via s3scenario #1router receives a packet with destination ip 10.0.255....

sarahr202 by Level 5
  • 532 Views
  • 4 replies
  • 0 Helpful votes
Review Cisco Networking for a $25 gift card