Switching

I am doing some switch upgrades and as a precuaution will need to backup switch configs before starting. I don't know whether the running conf has been wri m'd already - so will copy and paste the running config to a text file to be safe. My question...

Anyone know how to setup a catalyst switch for http access? I have neabled http and truned on authentication local fot http created use admin with pasword but I get a default screen one I attemp to login pointing me to support..

Dear all,is there any way to intyerconnect a Cisco 6509 (which only takes XENPACK interfaces to my knowledge) with a NEXUS 7000 which only takes SFP+ interfaces with 10GB speed? What could I do here to be future proof?--Joerg

Hi, I have a network with 4 different types of traffics and I would like to monitor them. I have 4 different Ports connected to different analyzers. Unfortunately I am only able to create 2 monitor sessions on my catalyst 3560G.Is there any workaroun...

Hi,I have a customer that have 3 routers 7600, and the behavior of mls cef is different in the 3 boxes.In one of this boxes they have one BGP full routing in ipv4 and another full BGP in one VRF, and they have this:sh mls cef summTotal routes: ...

Hi thereIf I had 2 distribution switches, then an access layer switch dual homed to both dist switches, running STP, But if I effectivley turned off STP on the link between the dist switches, what would happen on the access switch ? would it still wo...

Hi !I'm currently working on my BSCI certification. Here attached in the zip file, a small schema of my EIGRP lab and configuration of my routers labs devices. First question, if I was'nt used "no auto summurary" command on none of my router. And a...

I am configuring EIGRP between mentioned devices. On 3750 side i can see neighborship formed3 10.40.50.65 Vl417 14 00:00:00 1 2000 3 0However, on ASA side no neighborship formed.When looking at debug messages, I can se...

Hi,We have a C6500 running in hybrid mode and have seen alot of errors on 3 interfaces which are bundled together and connect to another C6500.The errors are jumbo frames. in the counters of the port we see alot of rxOversizedPkts and dot3StatsFrameT...

Hello!platform: WS-C3560G-24TS 12.2(50)SE1 C3560-IPSERVICESK9-Mon my L3 switch running BGP in simple configuration:router bgp XXXX no synchronization bgp log-neighbor-changes network X.X.X.X mask 255.255.224.0 neighbor n.n.n.1 remote-as...

Hi,Two 4500 switches both in HSRP mode, strangely can't see each other in cdp table.But they can see other edge switches as cdp neighbor. Both are connected to each other via fiber uplinks.Please advice on what could be the issue.Thanks.

Can We configure DHCP service on both the core switch (6509 IOS) keeping redundancy. currently we have configured DHCP in one core switch so when ever the core swich is down dhcp server also down.Thanking you...awaiting your reply

Hello,We have CA BrigtStore Backup solution for Messaging and Application which are in GB's. I am looking for recommendation if to have separate network from regular LAN Network or connect to the network.Is there any white papers or recommendation fr...