TelePresence and Video Infrastructure

Running VCSC x8.8.2I plan to upgrade to 12.5.6 and need to know if I can run the 12.5.6 upgrade file directly or do I have to increment from x8.8.2 and if so what firmware version should I use ???   Also on another note I have an old VCSC running x8....

Is the Cisco TelePresence ISDN Link 802.1X Compatible? Model: FTT171201BPSoftware: TC7.3.3.c84180a

Running Codian 4320's.  Getting tons of the following warnings ... Can't find where to clear them ... CPU's running over 50 percent and most of the time the bridge is sitting idle ???Network              Warning         getsockname () failed: Invalid...

Running CMS 2.6.1  Was working fine 5 day ago... Nothing noticeable changed but now when I try to login via the admin interface using any browser I get the reconnecting circle ?? Also I can't dial into any of my co spaces. I have rebooted the cms twi...

The customer have old MCU server Tabndberg MPS200 with latest on current day firmware. This MCU can work with maximum 4CIF resolution. When he start the meeting, Room Kit send to MCU the 4CIF resolution but MCU send to Room Kit only the CIF resolutio...

How do you use the # keypad for navigating through a call manager menu? up, down, left, right and selec

We have a C90 running firmware version TC7.3.2.14ad7cc.On our older 6000MXP Units there is an option in permissions to set "Allow Incoming Audio Only Calls" to "Off". I would like to do so with our C90 has started to get random robo h.323 calls.We do...

Hi Group,  Looking to set up DHCP Snooping and Dynamic ARP Inspection in our network for some added L2 security.  Added a few VLANs last night and noticed, after bouncing the ports, the Room Kits on one VLAN I added, were not able to bind address to ...

Hi, I'd like to know about webex meeting number.Sorry if this shoud be another board. I know there are several ways to make a webex meeting call, like call for "{username}@{sitename}.webex.com" or 9-digit meeting number.That {username} I wrote above ...

Do the embedded 10G NICs on the CMS 1000 M5 appliance support (downspeed) to 1G?I can't see anywhere that it says in the documentation.Thanks.   

I'm trying to configure fax detection on a CUBE 4331 version 15.4(3)S4.  I have a SIP trunk to the provider and a SIP trunk to CUCM. I have configured a dspfarm profile transcode with the associate app CUBE.  As well as added detect-fax mode local t...

Hello,  We have integrated a CUCM, where VCF devices are registered, a TMS to book meetings and a CMS to provide spaces. When we book a meeting, we want CMS to call VCF devices instead of waiting for the VCF devices to joing the meeting. We have conf...

Hello, Just want to know if IP Phone 3905 supports Extension mobility feature with CUCM 12.0. I went through the 3905 Data Sheets but those were not updated one. Also i did not found the feature mentioned for 3905 in Unified CM Phone Feature List in ...

We have thousands of users with personal coSpaces synced from AD on our CMS Cluster. We're rolling out OBTP for our Conference rooms. Is there any way to get TMSXE to use the meeting organizer's personal coSpace for the OBTP dial-in info?