Hi all,
I have questions about far-endcontrol in CMS. CMS have supported far-end control or not? and what endpont be supported?
I tested with SX series join to a space on CMS but can not FECC
Thanks,
Hi Guys,
How can we disable or restrict telepresense endpoints and Jabbers call transfer function from current conference to the same contrence to avoid call looping ？
//BR
Ted
Hey all, I'm having some problems changing the brightness on an SX10. I run the command Configuration Cameras Camera 1 Brightness Level: 1 but nothing happens. What am I doing wrong? Do I have to reboot the endpoint to get it to work or is there anot...
Hi all,
going through Expressway configuration i have a question about editing Traversal media port start & end. Which are consideration about modifying that range? Let's say i would decrease the window, which are effects to consider?
is there really...
Hi Team,
When using TMS 15.6.0 with a cluster of CMS 2.2.9, should we have to add only one CMS to the TMS or both?
When adding CMS, as any bridge it asks to configure numeric id for scheduled conference. If I do so for the first CMS, it automatical...
HiI have a 3640 connected via an E1 to a Nortel 61c.We are using primary-net 5 the 3640 is emulating the network and we are using overlap.The issue is that when we dial an access code and the dial-peer no. the call goes through. But whenever we do a ...
I've got a cluster of 2 x CMS (2.3) nodes managed by TMS (15.6), with TMS managing the primary node and the second node showing up in the "Clustering" tab.
During normal operation, the TMS conferences show up in both nodes' list of spaces and sched...
Hi,
I have a problem in that my phone works fine with my Cisco SPA 112 in that I can connect and receive calls, but if I try to join a conference call as an example and provide a connection code after the initial call is connected, that code is eithe...
Hello, Dear Support Community.
It is jabber, CUCM 10.x, Exp-C/E 8.5.
Each time I dial to external system via SIP URI like 5000@meeting.domain.com, a call is searched in DNS zone.
Exp-E requires NAPTR and then SRV for that domain. Only A-record exists...
Hello All,
I am calling from Polycom Realpresence app to Expressway E/C and i am getting blank source address.
Can any one know what setting required to put something in source address like name etc.
Note: i have already filled required details...
Hi,
If I buy cisco isr router and already have connection (E1) to the pstn and cucm,
can I make video call or conference ? (For a small company )
If supports what protocol will use .
Sorry I don't have any knowledge in voice or video
Thanks
Is it possible to register the DX70 running CE9 directly to a VCS E X8 via H.460/Assent as Firewall Tarversal?
The datasheet only mention "Cisco Tele Presence Expressway technology" as Firewall Traversal, but there is no mention regarding H.460 and...
Hi Guys
We have a SX80 with H.323 protocol in use. Is it possible to connect with Cisco TelePresence ISDN Link to make one to one phone calls?
In this case
Can I config SX80 just one isdn bri line ?where can I config which number people can reach m...
