TelePresence and Video Infrastructure

Hi, i encountered this issue, after much effort on trying, still failed, could anyone help? TelePresence SX20 TC 6.3 registers to SIP Server (Kamailio) ,  another SIP client (jitsi running on a Ubuntu) registers to the same SIP Server, in a simple l...

Hi All, I'm having an issue with TMS, where our Polycom endpoints (HDX) are unable to receive SIP phone book entries (only IP or H323). Is anyone able to confirm that they have had this working before? Please note that the endpoints are SIP enable...

Does TMS version 14.1 support SQL 2012 SP3 compatibility? SQL 2012 SP3 Always-On compatibility?  Any migration documents?  Thanks in advance!

Hi everyone! I am pleased to announce that CE8.1.0 is released and can be downloaded from http://www.cisco.comRelease summaryCE8.1.0 is the second feature release in the Collaboration Endpoint Software line. Please see below for the most significant ...

Welcome, After upgrade our NFR device to 7.3.4 firmware version, we can't connect to the unit - the LAN uplink is not active, it's not light. The device is starting without any problem, We can control the menu and camera - everything is working, exc...

I have a SX80 with SpeakerTrack60. While in a call, Camera2 will track and show an Output Video Resolution of 1920x1080. When it switches to Camera1, the Output Video Resolution goes to HEVC and will not track. Both Cameras have current software ce8....

I have a SX80 with SpeakerTrack60. While in a call, Camera2 will track and show an Output Video Resolution of 1920x1080. When it switches to Camera1, the Output Video Resolution goes to HEVC and will not track. Both Cameras have current software ce8....

Hi, I'm having an issue with the first letter of the caller id being stripped when displayed on the phone.I see the Caller ID coming in correctly from the ISDN on the voice gateway. the voice gateway is connected to the CUCM via SIP trunk. Any sugges...

Hello all, I would like to have your input on the following design: We have an existing video/telepresence solution based on VCS as call controle and we are planning to move to CUCM. Current setup include few MCU's installed on 3 different locations....

Is it "OK" to mount the Precision 60 or Speaker Track 60 camera system *between* the displays when mounted to the wall?  I have seen above-screen, on-wall, above-screen in-wall, below-screen on-wall and below-screen in-wall...  I have a scenario tha...

I have a customer with an MX800 with a CAB-DV10-12.5 touch panel cable but he say it is a bit short do you have a shorter cable that can be attached to this cable to give them more length if so what is that cable and do I need an adapter to attach th...

I have a customer with an MX800 with a CAB-DV10-12.5 touch panel cable but he say it is a bit short do you have a shorter cable that can be attached to this cable to give them more length if so what is that cable and do I need an adapter to attach th...