TelePresence and Video Infrastructure

Does anyone know how to assign "user URI part" from a range 2000 to 2099 for the LDAP sync user's cospaces? is it possible using coSpaceUriMapping? the value 2000 - 2099 is not available on LDAP to fetch. any ideas?

Hi all,my ssd in D9902 MK2 is dead. Do you have any idea if i can replace old ssd with any olther ssd? Or it must be ssd ordere from cisco with preinstalled system?I found some replacement ssds on ebay, but they say they are empty....How to install a...

Hi. How can I make RoomKit Plus codec not switched to the sleep mode.(the codec must remain active no matter what). Thanks

Any one out there have a URL to get the latest CISCO Telepresence Stencils i.e. WEBEX series, C220-M5 etc servers, CMS, CMM and TMS and peripherals?   Latest download on the CISCO site I noticed is 2013 ?? Thank you.  

Hello,is there a way to hide the camera button for entering the camera controls on the Webex Room Navigator? I deployed a Room Kit Pro with a Room Navigator and a Crestron touch panel for input source selection, controlling the lights etc. Additional...

is there a cad drawing of Webex Codec Pro – No Radio No Crypto, CS-CODEC-PRO-NR-K7=, TTC6-13. The connection side of the Codec.

Olá,Tenho um dispositivo Cisco SX10 que era usado em uma sala para participar de videoconferências. Recentemente mudamos nossa sede e preciso configurá-lo novamente em outra rede.Gostaria da indicação de algum profissional técnico para executar a con...

My name is Brandon, I’m IT on Solstice. We have 5 meeting rooms using Zoom and Cisco TelePresence SX10 cameras. Currently we are having some issues where for example, in the middle of a meeting a pop-up window show up from the right side with the rem...

What is the cause of the following error of c2w connection between webbridge and callbridge ( cisco cms).host:server:  WARNING : C2W connection to web bridge f8dfe3a2-10d4-43f8-ac16-3956efbb112e: connection failure

Hi,I need to fine tune the QOS on a Point to Point link for video calls. Users are experiencing audio issues during VC call between site A and B. There is voice loss experienced at either ends. we are using cisco sx20, 80 and webex room kits.I have t...

Hi,The Room Kit Mini is successfully registered to Cisco VCS and is able to make calls over WEBGUI. However the Touch 10 is stuck in the welcome page (screenshot attached) as if not registered. Same status after restart/factory reset. Any insights on...