TelePresence and Video Infrastructure

Resolved! TMS Provisioning, synchronize AD user not automatically

Dear ALLI have a Problem with a TMS Provisioning Directory which are synchronized with the AD Directory.if I start manually to synchronize, than is working fine.I see in the Info that will be the next start 4:00am but this does not synchronized wit...

MCU board 8510 SIP registration on Vcs

Hello, What do you think about using a neighbor zone on VCS for MCU in SIP against classic registration. It's the only way i found to palliate SiP generic préfix registration leack.Tank youRegardsSent from Cisco Technical Support iPad App

CAS/SIP configuration

Hi All,Using the cisco router (2900 series) as an SIP to E&M gateway. On one side we have a SIP device and on the other side of the gateway we have an E&M device.When the E&M device terminates a call the gateway should issue a SIP BYE message to the ...

voice volume is low when analog line connected to FXO port (2911)

hi,when i connect analog line direct to analog phone the voice volume is fine but when i connect to 2911 router (fxo port) the volume is low. i have cucmbe8.6 as call agent and 2911 as voice gateway.. following is the config for voice portsvoice-port...

Resolved! Presentation codec frame rate

what is the frame rate when I using the PiP as presentation output if I have presenation codec

No release key for endpoint update in TMS

Hi,After a long search, I don't find information on the process of update release key for the endpoints in the TMS.In TMS, some endpoints don't have license key for the update although they are under maintenance while others pick them up correctly....

Dial format from tandberg C20 to Polycom

Hi,I have a question about the dial format to call from a Cisco/Tandberg C20 to a Polycom H323 device.I tryied to call using the following formats:Public_IP##extentionextention##Public_IPPublic_IP!extentionPublic_IP@extentionThe didn't work at any ti...

Resolved! Question about multiple peer addresses on a VCS neighbour zone

If we configure a neighbour zone on a VCS to point to multiple IP addresses (Peer 1, Peer 2 etc), will it always try to use Peer 1 first or will it be round-robin?We have a secondary path at a remote site with lower WAN bandwidth, so we only want to ...

Movi Installation procedure

Hello all,Need to know for registering movi client with vcs required special license in vcs?We have a vcs X6.1 and tms 13-ver., Iam trying to register movi client, in the advances setings had provided the vcs ip.When trying to login with user id(wind...

Resolved! IP adress for the Test

I can not find the test IP address for the video conferencing system. all Tandberg IP address is no longer functional and unfortunately there are only IP polycom system test .

TX 9000 telepresence bandwidth

Hi Guys,what is the bandwith requirement for TX9000, i need to know some practical experience knowledge bec on cisco website its 10MB and one of the cisco customer are saying 14MB

TMS Upgrade SQL database 2005 to 2008

Hi I have the follow SituationTMS 13.x connect to a external SQL Sever 2005Is it possible to upgrade a TMS SQL Database (tmsng) from 2005 to 2008?Because we are using a external Database SQl 2005, now the SQL team would Upgrade the SQL Server to 2008...

Resolved! Ping failure with more than 76 bytes on Codian 4510

Hi All,Through some issue troubleshooting I've stumbled across what seems to be odd behaviour with the Codian 4510. In two seperate environments I've found that pinging the device with a packet size of greater than 76 bytes of data results in timeout...

Resolved! TMS Exchange 3.0.1 & TMS 13.2 Cisco TMS Server is not responding. Halting.

Hi,I've recently upgraded to TMS 13.2 and installed TMS Exchange 3.0.1. Installation and Configuration worked fine, but no events are synched to TMS. If I look at the log file I see the following line:Cisco TMS Server is not responding. Halting.It se...

9971 to substitute E20

Does someone know if is it posible to register the 9971 directly on a Cisco TelePresence VCS?what about auth, dual stream, firmware upgrades, etc?thanks

TelePresence and Video Infrastructure

Forum Posts

Resolved! TMS Provisioning, synchronize AD user not automatically

MCU board 8510 SIP registration on Vcs

CAS/SIP configuration

voice volume is low when analog line connected to FXO port (2911)

Resolved! Presentation codec frame rate

No release key for endpoint update in TMS

Dial format from tandberg C20 to Polycom

Resolved! Question about multiple peer addresses on a VCS neighbour zone

Movi Installation procedure

Resolved! IP adress for the Test

TX 9000 telepresence bandwidth

TMS Upgrade SQL database 2005 to 2008

Resolved! Ping failure with more than 76 bytes on Codian 4510

Resolved! TMS Exchange 3.0.1 & TMS 13.2 Cisco TMS Server is not responding. Halting.

9971 to substitute E20

Room Kit Pro Failing to Register to CMS via SIP TLS Handshake Error

Conference Room Double Booking Outlook/Door Pad

Cisco Meeting Server On-Prem Active Speaker Identification

Macro - Send info from touchpanel 1- to teams channel.

Room Booking (Cisco OS) cancel meeting

PAK for Remote Monitoring option for SX series endpoints

CMS310 did not generate MP4 files on NFS during conference recording.

factory reset on c60

seperately mute mics on sx80 and codec plus

p60 camera issue