As part of enabling jumbo frames end to end ESX-to-storage via iSCSI - one of the steps is enabling jumbo frame for storage in system QoS. I tried this out in the emulator and it gives a warning that packet flow through the UCS will briefly be halted...
Hi, We are getting this error below on the Cisco UCS B200 M5 2 Socket Blade Server. We just tried to added more 32GB RAM to the blade. I have not been able to find any information for the specific error. Can anyone inform what would cause this and pr...
Hi I am currently trying to resolve an issue where one of the hosts is unable to recognize the SD card (FlexFlash) thats inserted and install EXSI 6.7U3 on it. I acquired 2 of the Cisco UCS C420 M4 servers, one is able to fully boot via the SD card f...
dear gents,kindly your support as i have UCS 220 M5 server with 8 harddisk .i create raid5 and during installation esxi 6.5,the installer can't find size or drive to complete installation
i try update the firmware like this. try configure raid 0. update driver like this. still can't detect in partition when using centos 7.3 or latest. but when i try use centos 7.0 or previous version. i can detect the raid but fail for partitioning....
Hi all, Can anyone confirm that they can properly use ansible to automate tasks within UCSPE? I have tried a few versions of UCSPE and an ansible control node on both ubuntu and cygwin and the behaviour is the same in all cases. UCSPE is properly sta...
On my new gig I see that they have the iSCSI storage VLAN and data and management VLANs all on the same trunk on the same port channels to a Nexus 6k. I want to separate the storage traffic so that it's not part of that trunk/port channel. At least t...
Long story short, we upgraded a pair of our FI 6296 to from 3.1.3h to 3.2.3k and . The upgrade went successfully without any error. But once it done, it now shows 2 critical errors "F0411 - Thermal condition on chassis x is upper-non-recoverable". B...
Are there any default passwords used in UCS systems? (that are not unique to As per new California law that is effective from this Jan 1st, it prohibits sales in Californiahttps://leginfo.legislature.ca.gov/faces/billTextClient.xhtml?bill_id=201720...
Here I am with another UCS Central question... is it a problem to have two domains in the same domain group, if they have different hardware? I know that Central now uses maintenance tags for infrastructure firmware upgrades, which I use. I prefer ...
Hi guys. I'm setting up a new ucs server. It's a c240 m5. I've already configured cisco IMC but the challange is configuring the 2 lom data ports. When I go to chassis, inventory, network adapters, I can see the network adapter. However in the pci a...
Hello,I'm about to replace an faulty FI with a replacement one that was sent to us.My question is: If the new FI comes with a newer firmware. Would the replacement FI be automatically downgraded to 3.2 like it would be automatically upgraded if it ha...
Hello, I have UCS Servers B200M with package version 3.1(2b)B. I would like to configure a delay when the power is turn off and it come back again, the reason is SAN device start before that servers, in this case I want to set a delay in UCS Servers,...
We are trying to update the firmware/ Driver for VIC 1455-2 on our C220M5 but are having issues. Reinstalling the esxi OS doesn't give us the driver update option. The Host Upgrade Utility tool is nowhere to be found. How else can we upgrade the VI...
Hi, I am just wondering what the effects are of UCS Central license expiration. If a trial expires, does the UCS domains and service profiles become unusable (causing an outage), or do the profiles and configurations stay, but changes are not allowe...
