Hello , I have issues with the latest HX Platform installer. When i deploy my setttings i am getting Authentication error. Is anyone experienced such kind of problem ? VM shows the error : guest operating authentication failed for operation start on ...
Forum Posts
Dear All, why 1 interface on mds only can assign 1 vsan? (interface on mds connect to storage) can anyone explain and share documentation?
Resolved! HBA Options on C240
ON physical servers, when I install an OS, I disconnect my HBA's form the SAN to prevent any potential issues on Clustered storage. Having recently ungraded to 3.1.3c I noticed a new option in my HBA Actions. Where can I find documentation on th...
Hello guys, Do you know if I can do an upgrade from an standard 3260 Server without an expander module (to add RJ-45 Ports) to a 3260 server by just adding the expander module? Do I need Cisco to do it or can it be done by a customer/partner?
I have a storage profile policy pushing down from UCS Cental to a C240 M4. The storage policy dictates each of the 12 SAS disks controlled by the LSI MegaRAID SAS 3108 is a virtual RAID0 for a highly available application that just needs striping. R...
The max VLAN count per FI looks to be 32000, and 64000 when in optimized mode. With ACI we have a LOT of VLANs on some vNICs so we are approaching the 32000 limit. Is there any downside to enabling the VLAN port count optimization? And will it co...
Hi everybody. At this moment I have an issue with a Keyring's Certificated of the UCS platform of my client. They have a custom keyring with the name "Produccion2014" which is Expired right now. I have read that I can regenerate the default keyri...
I have seen others with this issue. I am attempting to re-purpose this server and requires installation of a local OS. OS installer does not see any physical disks or virtual disks. Rebooted expecting to see the option to <CTRL+?> to go into the B...
Hello everyone. Is it possible to purchase a PCIe riser for a C210 M2 that allows, say, an x16 video card, to run at full x16 speed rather than x8 speed? Thank you!
Hello, What type of battery was the BBU of the Cisco 12G mraid? Is a li-on battery? One of my customer need to ship a C220M4 from Italy to USA and would to know if there are some restrictions caused by the BBU inside the server. Thanks
Hi I posted similar Question before and no one answered it, looking for a clarity on QoS for a long time and hope someone can clarify it this time. Our environment consists of Microsoft Hyper V 2016 clustered nodes. 6248 UP FIs are connected...
Resolved! Some UCS QoS Default behavior questions
I'm trying to better understand how the default QoS behavior in UCS interacts with newly configured QoS policies. 1. My understanding is that the default behavior out of the box is that under congestion, FC traffic will get 50% of bandwidth and has...
Hi Guys, We are using Cisco B200 M4, we installed ESXi 6.0 U2 using Custom ISO provided by Vmware for Cisco blade. Issue: ESXi is getting stuckup at boot screen with this message vmw_vaa ip_hds loaded successfully hint: This issue is observed a...
Resolved! virtual drive info option is missing.
In UCS C240 M4, trying to create a raid setup. but "virtual drive info" option was missing. Only option available is "Clear boot drive" what may be reason ?
I currently run Cisco ucs mostly B200M3/4 blades with backend nimblestporage how does hyperflex fit into my existing environment if I want to scale? Do I keep buying Cisco UCS chassis and connect to my FI or can I use hyperflex?
