Unified Computing System Discussions

Hi Team, We are using a Hyper-V environment in UCS B-series Chassis wth FI 6200, We would like to know what is the best practic for the vNIC should we enable hardware failover at the UCS level or just create 2 vNICs one for A and one for B and then ...

I have 2 environments that were recently upgraded to 3.1(2e). After upgrading, I've found that logging into the CLI with local accounts is failing. It is also failing if I have the console auth set to local, and pass along my auth domain to log in vi...

Hi. We have a UCS C220 M4 with a VIC 1387 unused (we don't have QSFP+ switch ports or Cisco FI available). We see that IMC has an option to configure the adapter with "Admin speed: 4x10Gbps"  and we want to know if we could connect the QSFP+ port to ...

Folks, I'm hoping someone can give me some quick info on this. We currently have 6 x B200 M3 hosts configured using a Service Profile Template, which has a Boot Policy with only CD and iSCSI boot allowed (in that order). All hosts boot from LUNs on ...

Hi, We have some UCSB-F-FIO-785M cards from B200 M3 servers and are wondering if they would also work in B200 M4 servers? I can only see the newer type cards in the B200 M4 pdf but was wondering if anyone tried it (http://www.cisco.com/c/dam/en/us/pr...

Hello Folks, We have a customer based which is shipped with C220M3 servers. These servers comes with G200 Graphics inbuild as per the spec sheet. Anyone could you please help me to understand how we can show this to customer that they are actually pr...

For UCS C-220 M4 SFF Server:- I am using 4TB*2=8TB HDD. I configure RAID 1. UEFI boot option enable already. I am trying to install MS Server 2012 R2 operating system in server. When I try to make partition 250 GB for windows it create, but automatic...

Hello. I have to upgrade firmwares on 11 Blade servers and IOM in 2 chassis that is connecting with new Fabric Interconnect before adding the 2 chassis to existing Fabric Interconnect (different domain). ESXi will be installed on the server after at...

Hi there,We have ordered Cisco C220 M4 servers with Cisco UCS 12G SAS Modular RAID Controller. Also we have ordered Cisco 12Gbps SAS 2GB FBWC Cache.According  "Cisco UCS C220 M4 Server Installation and Service Guide", I can config these RAID levels:0...

Hi all,I was wondering on how do I go about getting my link on IO Module backplane.My set up as follows ..7 B200 server and 1 B440 server in a chassis.  All of my backplane ports are online except for 1 of the B440 ports.  It just has a link down.  N...