Unified Computing System Discussions

Hi Guys, I have two Servers C series I installed VMware Esxi v5 inside it then CUCM 8.6 and I made NIC teaming inside each server VMware and port group in my 6509 core switch which is connected directly with servers. C220 server(VMware esxi+CUCM) -...

i install esxi 6 on ucs b200M3  it is work good when i install esxi 6.5 in server side i not network good network not ping  any ip address only ping server ip address

Hello,  we currently have an environment of about 11 Chassis and around 175 blades, we are discussing a plan of doing a FW upgrade from 2.2.6f to 3.1.2b and I'm wondering if there will be any downside if we do upgrade the UCS Manager, IO Modules and ...

We have configured RAID 6 on a Cisco UCS Rack server C240 M4 which 24 nos. of 1 TB Harddisk. RAID6 is configured properly and we are able to see the usable capacity. But when we install a Linux Modified OS on it, we also see 2 more hard disk (see att...

We are currently developing an automation portal with: CPSC, CPO UCS Director. But, I'm faced to a really annoying problem: The task Execute VM Command and VIX Script are unusable. I did the troubleshoot with: PowerCLI, Result => Command executed ...

Does anyone have any experience upgrading to HUU 3.1.3? We're currently running 2.3.2 on UCS-E140S M1 and M2 blades. Any issues to be aware of? We see a fair amount of CIMC failures in our current environment. GUI is pingable but not responding. SSH ...

Hi, Can two different service profiles be associated with the master and slave in a B460 M4 server ? Or do the master and slave together forma single server to which only one service profile can be associated? Thanks, Pooja

Are there any clear and concise instructions on how to install the emulator from start to finish? From file download to being able to open and launch the emulator? I have the guide titled "Cisco UCS_Platform_Emulator_Release_Notes_3_0_2cPE1.pdf" but ...

I need to plug in more SAS connected disks to my C220 M4S server and I just have two questions. First is, I noticed there are two SFF-8087 ports on the board but it doesn't look they support SAS (Cisco Documentation specifically says SATA only), how...

We used HUU updated a C220 M3 server from 1.5.1f to 2.0.9c.  The server use embedded  software raid controller.  After update, the server boot stuck at the Raid controller, never can boot pass it.  While load the HUU, the raid controller was never de...

Hi, We have UCS C220 M3 Server and IBM DS3200 storage. The storage box has SAS controller.  IBM storage using for data storage and backup purpose. We are planning to connect UCS Server to IBM storage through SAS cable. We have LSI SAS9212-4i4e. We ha...

I cannot find a Solaris FC driver for UCS, and some old posts I found while Googling suggest that others have been able to install Solaris.  However, my Solaris installer cannot see any HBAs.  What am I missing?  The UCS config works, this same blade...