Unified Computing System Discussions

Resolved! Can I configure some ports on FI-6200UP GEM as server ports?

Hi,I need your help!I know FI-6100 doesn't support to be configured its some port on GEM as server ports.Is it possible to configure some ports on FI-6200UP GEM as server ports?And also, I wonder that some ports(1/9-16) on a port group(Second) can be...

UCS Manager 2.0(1t): Failed to validate certificate. Certificate

Hi,I have 4 UCS B230M1 Blades and since update to 2.0(1) from 1.4(3q), I can't lauch UCS Manager, java throws the exception: "Certificate has been revoked"It seems that the certificate used to sign the java code has been revoked, so this is a very i...

Resolved! UCS-C240M3 NIC Teaming

Hi,our customer plans to connect his (to be delivered) UCS-C240M3 to a catalyst switch and wants to usethe integrated NIC Teaming feature of this UCS Server. Is there any special configuration needed oncatalyst site for this? Does the UCS NIC Teaming...

Resolved! Limitation of UCSM integrated C-Series Server

I just stepped over some limitations of UCSM integrated C-Series Serverhttp://www.cisco.com/en/US/docs/unified_computing/ucs/c/sw/raid/configuration/guide/Cisco_UCSM.html#wp1068282Maximum of One RAID Volume and One RAID Controller in Integrated Rack-...

UCS Uplinks to Core Network Issue

Hi,we recently purchased a UCS setup to run our EXS hosts on. we have two 6248 Fabric switches and one 5108 chassis. I have setup for the most part everything I would think I needed to get a VM Host up and running for testing. Created IP pool for ...

System VLAN's on n1000v

Hi allwhen deploying the VSM on a Standard Switch, is it a requirement to include System VLAN's for my the packet and control VLAN's in the Port-Profiles on the dvs?Many thanks

Software failure in FI 6120

Hi,I have got one UCS for lab practice but when I started the FI 6120 i found on console that it is in loader mode. I also tried to reboot it twice or thrice but still it is in same state. When I tried with dir command I found there is nothing in its...

max vnics on C460-M2, managed by UCS

Is there a max limit on the number of vnics, that a C460-M2, managed by UCSM supports ?UCS V2.1.2a, C460-M2 connected to FI, 2 x VIC-1225, SP defined with 8 vnics.On association, customer sees error messagefailedconnection-placementthere are not enou...

How to tell if VLAN added to 6248s?

We are working to solve a connectivity problem with virtual machines on a Distributed Virtual Switch. They are connected to a distributed port group that is configured with a VLAN, and the VLAN ID is entered in the distributed port group's properties...

UCS Manager on C-Series Standalone

Is it possible to run UCS Manager on a C-Series Standalone? I am not able to find any instructions on how to do this. Solarwinds has said that to interface Orion with the UCS, we need to be running UCS Manager. But all the documentation I've found...

Tx errors on the FC port of the Fabric Interconnect

Hi Guys,I'm seeing a lot of tx errors on the FC uplink port of the FI ( both the ports of SAN port channel). I'm trying a EMC SAN boot one of the Blade and it fails with IO error. My question is if I have an issue with the LUN or EMC SP port or on ...

Can 6200 series Interconnects act as FC Fabrics?

Greetings. I know with UCS 2.1 you can plug the FC SAN directly into the fabric without the need for an upstream mds switch for zoning.Can you plug the SAN directly into the interconnect as well as an external host (say some random rackmount server) ...

Low performance in FCOE TX in Nexus 5000

Dear MisterI have a problem in the transmision of data. I have a Nexus 5000, using VFC(FCoE) toward FC ports. The ethernet with FCOE, also have IP traffic, and thsi traffic is functioning rigth, but, in the same wire, the FCoE show low performance. H...

Resolved! VM-FEX and Nexus 1000v relation

HiI am a new in virtulaization world and I need to know what is the relation between Cisco Nexus 1000v and Cisco VM-FEX?, and when to use VM-FEX and when to use Nexus 1000v. Regards

Cisco Security Manager 4.2 Installed over Vmware 5.0

Hi team from the community, I want to install the Cisco Security Manager 4.2 over Vmware 5.0, I Looked in the installation guide but It only supports VMWARE 4.1.RegardsJose

Unified Computing System Discussions

Forum Posts

Resolved! Can I configure some ports on FI-6200UP GEM as server ports?

UCS Manager 2.0(1t): Failed to validate certificate. Certificate

Resolved! UCS-C240M3 NIC Teaming

Resolved! Limitation of UCSM integrated C-Series Server

UCS Uplinks to Core Network Issue

System VLAN's on n1000v

Software failure in FI 6120

max vnics on C460-M2, managed by UCS

How to tell if VLAN added to 6248s?

UCS Manager on C-Series Standalone

Tx errors on the FC port of the Fabric Interconnect

Can 6200 series Interconnects act as FC Fabrics?

Low performance in FCOE TX in Nexus 5000

Resolved! VM-FEX and Nexus 1000v relation

Cisco Security Manager 4.2 Installed over Vmware 5.0

Hearty congratulations to the December Spotlight Award winners!

Renew.cisco.com just got refreshed, and it will make your life easier!

Announcing Resources That Guide You to Success

Export from 6248 Fabric Interconnects and import to 6454 FIs

Help, i have a question about Vlans overlapping different vlan groups

B200 M5 Stopped During Boot.

show int Vethernet time interval

Ucsm

Managing vNICs and vHBA's

Compatibility query

UCS Port Channel LACP policy

add a vlan to multiple service-profile remplates vNIC via CLI

CLI command to see IP addresses assigned to the IFM (when using IMM)?