Hione of my customer, needs an additional HDD for his server. when he buys the new HDD, how will that HDD come in to cisco warranty. and what is the procudure for the same.Regardsjeetendra
I'm setting up iSCSI boot for UCS 2.0 and have a query about the 'Set iSCSI Boot Parameters' page.When using a service profile template you only seem to be able to enter one initiator name in the template and that same name is used for all service pr...
Hello all,I've searched around for the answer, so forgive me if this question is has already been answered and I just missed it.The short and skinny is that because of the need to have a disjointed L2 network, without changing from EHM to Switch mode...
HiWe are trying to use HP P410/512Mb SAS2 adapters in our C210 M2 servers.Theserver hangs after option ROM for the adapter are shown.Are these adapters not compatible with UCS servers ?
Hi,I have Windows 2008R2 installed on a Bare Metal B200M2 Blade and I'm seeing slow file transfers(70-150KB/sec) trying to get to plain old windows file shares on an IBM N5200(NetApp Gateway). All other workstations/servers don't see this slowdown. ...
Cisco UCS 6100 fabric A is configured as cluster (only one member), Fabric B configured as standalone How can I add fabric B to cluster environment. Inicial setup is no longer avaialbale? any cli command avaialbale that I can use?Thanks
Hey,I'm getting a little consfused about what is required to get this working. I know in ucsm 2.0 isci boot is supported, and isci vnics became an option -- however does it depend which mezz card you have?For example, I see in different mezz card des...
Hello,I know is possible to connect several EMC and NetApp NAS devices directly to UCS Fabric Interconnects. Question is:Is it possible to directly connect an EMC Data Domain NAS, publishing CIFS/NFS shares?Thanks a lot,
Hi All,anyone aware of any reason the VEM on Nexus 1 k is flapping, %PLATFORM-2-MOD_REMOVE: Module 1 removed (Serial number T5056B3041C)log below keep on appear.is already took more than 2 month, Cisco TAC and VM TAC, can't find any reason why the Vi...
Hi all,We have a C210 M2 Server with LSI 6G MegaRAID 9261-8i Card and factory shipped SAS Extender (up to 8 drives support).We have 2 x 73Gb SAS 15K RPM Drives, and 5 x 600Gb SAS 10K RPM Drives.We have setup a RAID 1 with the 73GB Drives and a RAID 5...
Hi,i'm installing Solaris 10 update 9 on UCS B-Series (B230 M2 or B440 M2) with M72KR-Q Adapter. We create the Service Profile with vNIC associated to vNIC Template. The vNIC Template use the MAC Pool Address configurated.When we run ifconfig -a on S...
Hello,I have the following configuration and I suspect that there is a loop, but will need someone to verify.We have (2) HP C7000 Enclosures with each enclousure has (2) Flex-10 Modules and each Flex-10 module has (2) 10Gb LACP connected to Cisco ...
Hi All , Could someone please explain what the following means in the GUI Configuration guide of UCS @ http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/2.0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_0101.pdfUplink Fibre Chann...
Hello,I'd like to know whether a new blade server purchase means forcibly an upgrade of the existing UCS infrastructure to the newest UCS Manager release?Thanks a lot,
We have two B200m blades that we have installed with Windows 2008 R2 and need to determine if the current driver set available for the MK81R/MK82R for Windows 2008 R2 supports VLAN tagging from inside of Windows. If anyone could point me in the righ...
