Unified Computing System Discussions

Hi,Giving warning when server reboot or shutdown in VIF tab LINK status for vHBA ports.Status : If server are power on and running the Link status in VIF show UP for all port.Problem : If we shutdown or reboot the server we get error on the link stat...

Got a box of licenses for a 6120 UCS. Have like 40 10GB port licenses. But they are a CD, that has vague documentation on it, and a card with a "Product Authorization Key" on it. Cannot figure how under "License Management" to install these. It only ...

Hi,I am having an anoying issue in UCS Manager, 6 weeks ago we did some tests and we were unpluging randomly some cables from the FEX (IO) modules.During this time there were multiple alerts generated, we acknowledged one of them for testing purposes...

Hello,I have a B250 M2 with the amber fault light /!\ on the right blinking. The thing is I am not showing any faults with this blade or in my cluster as a whole. Just wanted to see if any one had a quick thought on this before I go to TAC.Thank you,

Hi all,i got a UCS C200-M2 with an additional LSI 1064E raid card, the storage has been build as Raid 0+1 with 4 500GB SATA HDD, i try to simulate a disk failure situation, which is swap one HDD with a brand new HDD. The raid card can detect the new ...

So currently I am installing ESXi 4.1 on a C210 M2 series server. The basic install is completed and I am configuring the networking. I have two VLANs 10.1.152.0/24 (VLAN 152 Voice) and 10.1.153.0/24 (VLAN 153 Mgmt). The trouble I am having is I am u...

My customer is seeing loss of access to FC attached SAN on b-series blades that have windows and Red Hat installed bare metal, VMware are fine just these 2 OS's.  It happens when the 6100 fails over to the subordinate.  They say they reboot the serve...

Hi. Cisco gurus:May I have the authoritative answers on the following?1. What is the Use Case of FC Port Channel under SAN Cloud assuming I have the typical Cisco VSAN setup-1 VSAN tied to 1 SAN Switch and 1 FCoE VLAN and another VSAN with diff. VSAN...

I have been stuck on setting this server up for a couple days now.  I have never had such issues with installing a server before and can't figure out what i am misssing...I am able to load the Windows software to the point of Where do you want to ins...

Hi I would like to know the procedure in renaming a given UCS.We need to rename the whole cluster , and i want to ensure we renamed across the cluster  - where -ever the old name exists.Could some one please share the details.ThanksVamsi