We have a pair of 6120s connected to a single chassis. We have the management interfaces set up asFabric a = 10.1.239.2Fabric b = 10.1.239.3Virtual IP 10.1.239.1The HA cluster is showing active and operational.Issues:We can access the system fine by ...
Good afternoon,i'm starting to use the UCS C-Chassis, and i'm having problems accessing the KVM Virtual Media.Access to the KVM it's possible and doesn't have any problem. The problem is when i try to use the Virtual Media.Each time i try to use it i...
hello friends,The question is the same as in another discussion, so I ask you to help me confirm it, the UCS servers Can be used instead of MCS servers in Cisco `s Applications like: CUCM, Cisco Unified Presence, Meeting Place, etc?I could show so...
We just received two UCS C200 M1 systems with 4GB (2 DIMMS) each. Whenever we boot either system, the memory fault and system fault lights come on. The CIMC log says that there is a moderate fault, but none of the internal memory fault lights are on....
After create a service profile and associate the service profile with a blade,then,using KVMWhen select Tools->Launch Virtual Media . KVM report" login failure Reason:Bad username or password"why?the attached is the shot.
I tried to associate a service profile, it reports an error "insufficient-resources,vnic-capacity." Does it verify overcommitment of resouces againist physical capability when associating ? what checks are done during this task.Larry
Hi, I'm fairly new to the UCS/VMWare world. Another tech in my department who is mainly responsible for our VM infrastructure is doing some work with Vmotion and trying to set up some high availability failover for our VM's.What we'd like to do is h...
anyone have some info on the physical dimm layout in the 5100 b series blades? physical labeling for dimm replacement?ucs manager shows two bad dimms, need slot labeling...
