Hello, I bought a USC C220 M4 and installed the following components: 2 x Intel XEON e5 2696 v4,8 x DDR4 ECC REG 16GB The problem is that the system keeps powercycling when I try to boot the system.While the system is booting the system status LED i...
Forum Posts
Resolved! CIMC SMTP
Hi Everyone,I want to know if cisco CIMC is support SMTP with authenticationif no , is there any option or tool to send email alert if there is hardware issue
Someone at work who has now left went nuts on Service Profile Templates and, for example, created 5 templates for one type of server. So I'm looking at consolidating the templates and would like to know, is there a way to compare template settings to...
The current Storage Policy - Disk Group Policy "ST0_RAID1" is used on a bunch of rack servers with 2x HDD for RAID1 boot LUN. We now have SSD drives in our newer C240s and thus the Disk Group Policy will not work as it it specifically looking for HDD...
Hi All I just replaced my raid controller (Cisco 12G Modular Raid Controller with 4GB cache , UCSC-RAID-M5HD), i am using cisco UCS C240 M5SX server the problem is i cant access raid configuration page, i already restart the server and press Ctrl+R,...
We currently use the following disk sizes in our environment for rack servers:300GB HDD/SSD as a 2-disk RAID1 for OS.960GB SSD as a 5-disk RAID5 for Data.240GB SSD as a 5-disk RAID5 for Data.At the moment, our UCS service profile templates are only c...
I have a UCS FI I want to use for testing but for some reason it stuck in the initialization wizard...I want to re-image it but as far as I can tell, the re-imaging process is TAC only. Unfortunately there is no service contract associated with this ...
UCS 5108 - B200 M5 bladesGoogle/Cisco aren't making this easy to pin down to make a simple flat network on VLAN 1 to bring the blades up to test install ESXi and ensure all green blinkenlightsI added two interfaces to the LAN uplinks manager and VLAN...
My main aim is to install the Hyperflex html5 plugin for vCenter. When i do so, it asks for the controller root password. What i have for the root password seems to be incorrect, although I can log on at the console using this password So ive tried...
I have a problem with my Cisco UCS C250 M1 Rack Server. Not sure of the cause. Suspect it may have dirty power. I may need power conditioner. But that is just me trying to correlate the problem with what I have – which is the power specs. http://www....
Hello, I'm trying to automate the install of Esxi servers in Cisco Blades, using powertools and I'm struggling to:- attach a remote media ISO- force the blade on next reboot to boot from the ISO I'm able to achieve the first point by doing all of thi...
Hello, we have two 6296 that wont boot after power loss. We tried to connect to console but this also not work. So we dont get logs or a console access. I think we have maybe in this bug: https://www.cisco.com/c/en/us/support/docs/field-notices/640/f...
I have a UCS-C220 integrated with UCS Manager using a VIC in the MLOM slot. Using UCS Manager, I configured a single vNIC, which is working fine.My question is, is it possible for the O/S to access the two 1Gb NICs on the motherboard, as well as the...
Hi, I've got a new C240M5 with 4x240GB SSDs in Bays 1-4. I can see them in the Bios when I run the software RAID utility. BIOS lets me build a virtual drive and initialize it, but when I look in inventory in CIMC or try to install something they don...
Hi All, I am facing issue getting ESXi boot after fresh installation. My environment is boot from SAN (Pure Storage). Strange part is that I have other UCS blades that are booting fine. Only difference is, hosts that are booting fine were installed b...
