I find articles that the Nagios Plug-Ins for Cisco UCS are Deprecated because using Python 2.7Is there any new version of this tool or an other tool to check the Hardware in an UCS-Environment with Nagios/Icinga? GreetingWolfgang
Forum Posts
Hi I have a cluster of 2 FI 6296How to break the cluster into 2 standalone fabric interconnects. Each will be connected to a separate chassis and storage If there is no way except erasing the configuration. I could erase the secondary. But I need to ...
How can I add an existing VLAN to a vnictemplate via ucs powertools version 2.5.1.6 in ucs central? best regards,
Hello everyone.I am running 50 Servers and 6 Chassis in my environment. I need a mechanism for Network traffic monitoring that includes UCS vNIC traffic monitoring, traffic monitoring between vlans within a chassis and visibility that on which blade...
Resolved! VIC 1400 topology
Hi, guys!I'm trying to find the description of VIC 1400 connection topology inside 5108 chassis, but for some reasons, it's not described - neither in the datasheet (like the 1300 is described - here), nor in cisco live presentations.My questions is:...
Within UCSM, I can set the scheduled policy backup and export as daily, weekly and bi weekly. But if chose weekly or bi weekly, what would be the day of the week the schedule be executed? The day I enabled the backup schedule? If I chose daily as the...
Hi everyone, I need to upgrade the ESXi hosts running on two UCS C220 M4S servers. These server are BE so they came with the ESXi 5.5 pre installed. I'll be upgrading the CIMC first, from version 2.0(8d) to version 4.1(1c). Then I need to upgrade the...
Hi Trying to use the Splunk add-on app for UCS ... when I'm adding the UCS Manager in the app .. I get 409 Conflict - Configuration failed. Check if an item of the same name already exists.Has anyone come across this? Any ideas on how I can fix this?...
Hello, From the C220 documentation and several posts I´ve learned that X520 cards only support certain SFP modules but not the Cisco ones. Is there any way to identify which modules are installed either from GUI or CLI??? I have a tech-support file o...
Question: Can someone please me understand/decode the location of the below NVME driveDoes " Slot Description: Chassis slot 0; relative bdf 08:00.0" indicate any slot location on the server?What is BDF. Does this 08:00.0 signify anything to drive loc...
Hello, I copied the title of this discussion from a question 2 years ago.Here's the link: https://community.cisco.com/t5/unified-computing-system/b200m3-with-2600-series-processor-and-esxi-6-7/td-p/3380284 The same question applies now for ESXi 7.0. ...
Dear all, We have a B200M4 blades servers. 16GB DIMMS modules are installed. I want to add 32GB DIMMs Modules. Can i add 32GB modules along with 16GB DIMMS.
Hi, I have a Cisco UCS C240 M4 server with E5-2690v3. Recently we decide to upgrade the CPU to E5-2660v4. The server has been flashed to firmware version 4.1(1c). The server not able to boot up after installing the new CPU E5-2660v4. When change ba...
Resolved! B200M3 KVM Problem
Hi everyone, I have a UCS 5108 with FI (2 in cluster) 62xx. The UCS is composed with 4 blades B200M3 and 4 Blades B200M4. The 4 Blades B200M4 work without problem, the another 4 blades M3 have plenty of problem, I can't reach them in KVM (I use a sta...
Hi ,I have to deploy UCS C240 M5 server but unable to install driver for window 2012 but successfully installed driver for 2016. Has support for window 2012 has been ended ?
