Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
dears
have a good day
i have the following scenario, i have three internet providers ISP with three Links terminated on three different local routers ( ISP 1 ---> R1 , ISP2 ----> R2, ISP3 -----> R3 ), each ISP think he is alone ISP, and each ISP ma...
i have project that contain the following scinario :
i have CUCM Publisher , Cisco unity connection, Cisco Expressway- E , Cisco Expressway - C all these machine have been installed running fine, i need to know the scinario of configuration ( i need...
i have CUCM 10.5.1 and i need to reset web password on that call manager , i know the command to do that :
utils reset_application_administrator_ui_password , but im afraid if i apply it on the call manger and i cant login again , how i will change...
i have installed CUCM and gateway , on the CUCM gateway is added as sip trunk , i created route pattern on CUCM and dial peer on gateway , digit manipulation is done on CUCM ( Predot ) , i connected to PSTN via FXO , i created dial-peer on gatway and...
i have a cluster consists of CUCM Publisher and two CUCM Subscribers , auto registration is disabled on Publisher and enabled on Subscriber 1 and subscriber 2, also i have tow CM Groups as below : CMGROUP1 :subscriber 1subscriber 2Publisher Auto reg...
I prefer to do explanation of TCL script itself, so the topic will be completed.i dont know where this script configured i mean is it available by default in router flash, could you illustrate that in more detailed and focusing on TCL script. thanks ...
For small business switches, it is better to do upgrade using web , however you can upgrade the firmware using cli but to make sure check the below points :check that you've uploaded the image or firmware or binary file to the switch flash.check if t...
