open CUCM Pub CLI and enter command "utils system enable Administration" to unlock the config change and enable GUI administration for configuration and service. ... View more

Hi credentials are correct. Cross verified. Here is my observation. Is this could be causing the issue ? for CUCM version 12.5 inside https://<cucmIP>:8443/realtimeservice2/services/RISService70?wsdl I have below entry. <wsdlsoap:address location="https://localhost:8443/realtimeservice2/services/RISService70"/> but for CUCM 11.5 localhost is replaced with specific IP address. Is that could be causing the issue ? ... View more

Hi for CUCM version 12.5 inside https://<cucmIP>:8443/realtimeservice2/services/RISService70?wsdl I have below entry. <wsdlsoap:address location="https://localhost:8443/realtimeservice2/services/RISService70"/> but for CUCM 11.5 localhost is replaced with specific IP address. Is that could be causing the issue ? ... View more

Hi for CUCM version 12.5 inside https://<cucmIP>:8443/realtimeservice2/services/RISService70?wsdl I have below entry. <wsdlsoap:address location="https://localhost:8443/realtimeservice2/services/RISService70"/> but for CUCM 11.5 locahost is replaced with specific IP address. Is that could be causing the issue ? ... View more

Seems like something else is wrong. I can access this link through browser. Script is giving error. But same script works perfectly with CUCM version 11.5 https://x.x.x.x:8443/realtimeservice2/services/RISService70?wsdl ... View more

Thanks, I will cross verify. it could be firewall issue. Is there any limitation of only 1000 IP Phones can be retrieved ? Currently I don't have setup with more than 1000 IP Phones. ... View more

Hi Issue fixed with your help. But same script doesn't work on CUCM ver 12.5, it works perfectly on CUCM ver 11.5. Do you have any clues ?   Rgds Rajesh ... View more

Dear Hector I have rectified it by modifying the script print part as below. Now script is working fine. result = client.service.selectCmDevice(stateInfo, criteria) for node in (result['SelectCmDeviceResult']['CmNodes']['item']): for device in node['CmDevices']['item']: ipaddresses = device['IPAddress'] ipaddress = ipaddresses['item'][0]['IP'] if ipaddresses else '' print (device['Name'], ipaddress, device['DirNumber'], device['Model'], device['Protocol'], device['Description'])   However, this entire script works fine with Cisco CallManager version 11.5. But when I run this script on CallManager ver 12.5. I get error.   $ python phone2-m.py Traceback (most recent call last): File "D:\code\dnav3-code\venv\lib\site-packages\urllib3\connection.py", line 159, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw) File "D:\code\dnav3-code\venv\lib\site-packages\urllib3\util\connection.py", line 80, in create_connection raise err File "D:\code\dnav3-code\venv\lib\site-packages\urllib3\util\connection.py", line 70, in create_connection sock.connect(sa) ConnectionRefusedError: [WinError 10061] No connection could be made because the target machine actively refused it During handling of the above exception, another exception occurred: Traceback (most recent call last): File "D:\code\dnav3-code\venv\lib\site-packages\urllib3\connectionpool.py", line 600, in urlopen chunked=chunked) File "D:\code\dnav3-code\venv\lib\site-packages\urllib3\connectionpool.py", line 343, in _make_request self._validate_conn(conn) File "D:\code\dnav3-code\venv\lib\site-packages\urllib3\connectionpool.py", line 839, in _validate_conn conn.connect() File "D:\code\dnav3-code\venv\lib\site-packages\urllib3\connection.py", line 301, in connect conn = self._new_conn() File "D:\code\dnav3-code\venv\lib\site-packages\urllib3\connection.py", line 168, in _new_conn self, "Failed to establish a new connection: %s" % e) urllib3.exceptions.NewConnectionError: <urllib3.connection.VerifiedHTTPSConnection object at 0x03A34ED0>: Failed to establish a new connection: [WinError 10061] No connection could be made because the target machine actively refused it During handling of the above exception, another exception occurred: Traceback (most recent call last): File "D:\code\dnav3-code\venv\lib\site-packages\requests\adapters.py", line 449, in send timeout=timeout File "D:\code\dnav3-code\venv\lib\site-packages\urllib3\connectionpool.py", line 638, in urlopen _stacktrace=sys.exc_info()[2]) File "D:\code\dnav3-code\venv\lib\site-packages\urllib3\util\retry.py", line 399, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='localhost', port=8443): Max retries exceeded with url: /realtimeservice2/services/RISService70 (Caused by NewConnectionError('<urllib3.connection.VerifiedHTTPSConnection object at 0x03A34ED0>: Failed to establish a new connection: [WinError 10061] No connection could be made because the target machine actively refused it')) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "phone2-moh.py", line 38, in <module> result = client.service.selectCmDevice(stateInfo, criteria) File "D:\code\dnav3-code\venv\lib\site-packages\zeep\proxy.py", line 45, in __call__ kwargs, File "D:\code\dnav3-code\venv\lib\site-packages\zeep\wsdl\bindings\soap.py", line 122, in send response = client.transport.post_xml(options["address"], envelope, http_headers) File "D:\code\dnav3-code\venv\lib\site-packages\zeep\transports.py", line 95, in post_xml return self.post(address, message, headers) File "D:\code\dnav3-code\venv\lib\site-packages\zeep\transports.py", line 62, in post address, data=message, headers=headers, timeout=self.operation_timeout File "D:\code\dnav3-code\venv\lib\site-packages\requests\sessions.py", line 572, in post return self.request('POST', url, data=data, json=json, **kwargs) File "D:\code\dnav3-code\venv\lib\site-packages\requests\sessions.py", line 524, in request resp = self.send(prep, **send_kwargs) File "D:\code\dnav3-code\venv\lib\site-packages\requests\sessions.py", line 637, in send r = adapter.send(request, **kwargs) File "D:\code\dnav3-code\venv\lib\site-packages\requests\adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='localhost', port=8443): Max retries exceeded with url: /realtimeservice2/services/RISService70 (Caused by NewConnectionError('<urllib3.connection.VerifiedHTTPSConnection object at 0x03A34ED0>: Failed to establish a new connection: [WinError 10061] No connection could be made because the target machine actively refused it')) (venv)     ... View more

Thanks a lot. This feedback resolved the issue. Your feedback was very useful. Appreciate, if you can provide me link, how to understand the output which I shared before. I still could not get the concept of SelectCmDeviceResult']['CmNodes']['item']):   Issue rectified with below correction. for node in (result['SelectCmDeviceResult']['CmNodes']['item']): for device in node['CmDevices']['item']: ipaddresses = device['IPAddress'] ipaddress = ipaddresses['item'][0]['IP'] if ipaddresses else '' print (device['Name'], ipaddress, device['DirNumber'], device['Model'], device['Protocol'], device['Description']) ... View more

I am trying to write Python script to display only registered IP Phones detail from Cisco CUCM ver. 11.5 I’m getting one error while displaying output as mentioned below.   from zeep import Client from zeep.cache import SqliteCache from zeep.transports import Transport from zeep.plugins import HistoryPlugin from requests import Session from requests.auth import HTTPBasicAuth from lxml import etree import urllib3 from urllib3 import disable_warnings from urllib3.exceptions import InsecureRequestWarning username = 'xxxx' password = 'xxxx' wsdl = 'https://x.x.x.x:8443/realtimeservice2/services/RISService70?wsdl' session = Session() session.verify = False session.auth = HTTPBasicAuth(username, password) transport = Transport(cache=SqliteCache(), session=session, timeout=20) history = HistoryPlugin() client = Client(wsdl=wsdl, transport=transport, plugins=[history]) factory = client.type_factory('ns0') macs = ['*'] #'*' for all item=[] for mac in macs:     item.append(factory.SelectItem(Item=mac))     Item = factory.ArrayOfSelectItem(item) stateInfo = '' criteria = factory.CmSelectionCriteria(     MaxReturnedDevices = 1000,     DeviceClass='Phone',     Model=255,    #255 for all     Status='Registered',     NodeName='',     SelectBy='Name',     SelectItems=Item,     Protocol='Any',     DownloadStatus='Any' ) result = client.service.selectCmDevice(stateInfo, criteria) for node in (result['SelectCmDeviceResult']['CmNodes']):     for device in node['CmDevices']:         print (device['Name'], device['IpAddress'], device['DirNumber'], device['Description'])       If I just print (result) I am getting output as below output, I want to display output in proper way. Only name, IP address, directory number and description But while adding "for device in node" I am getting error on this line as below; for device in node['CmDevices']: error is: Traceback (most recent call last):   File "phone2.py", line 40, in <module>     for device in node['CmDevices']: TypeError: string indices must be integers   Pls. advice why TypeError: string indices must be integers   Script Output from Cisco CallManager, while running the script with only print (result) {     'SelectCmDeviceResult': {         'TotalDevicesFound': 43,         'CmNodes': {             'item': [                 {                     'ReturnCode': 'NotFound',                     'Name': '10.10.161.10',                     'NoChange': False,                     'CmDevices': {                         'item': []                     }                 },                 {                     'ReturnCode': 'Ok',                     'Name': '10.10.161.11',                     'NoChange': False,                     'CmDevices': {                         'item': [                             {                                 'Name': 'SEP009AD2D3E9C0',                                 'DirNumber': '7010-Registered',                                 'DeviceClass': 'Phone',                                 'Model': 688,                                 'Product': 573,                                 'BoxProduct': 0,                                 'Httpd': 'Yes',                                 'RegistrationAttempts': 1,                                 'IsCtiControllable': True,                                 'LoginUserId': None,                                 'Status': 'Registered',                                 'StatusReason': 0,                                 'PerfMonObject': 2,                                 'DChannel': 0,                                 'Description': 'SEP009AD2D3E9C0',                                 'H323Trunk': {                                     'ConfigName': None,                                     'TechPrefix': None,                                     'Zone': None,                                     'RemoteCmServer1': None,                                     'RemoteCmServer2': None,                                     'RemoteCmServer3': None,                                     'AltGkList': None,                                     'ActiveGk': None,                                     'CallSignalAddr': None,                                     'RasAddr': None                                 },                                 'TimeStamp': 1561098640,                                 'Protocol': 'SIP',                                 'NumOfLines': 1,                                 'LinesStatus': {                                     'item': [                                         {                                             'DirectoryNumber': '7010',                                             'Status': 'Registered'                                         }                                     ]                                 },                                 'ActiveLoadID': 'ce-9.3.0-d31e4c18-2017-11-21',                                 'InactiveLoadID': None,                                 'DownloadStatus': 'Unknown',                                 'DownloadFailureReason': None,                                 'DownloadServer': None,                                 'IPAddress': {                                     'item': [                                         {                                             'IP': '10.10.161.187',                                             'IPAddrType': 'ipv4',                                             'Attribute': 'Unknown'                                         }                                     ]                                 }                             },                             {                                 'Name': 'SEP00A3D15CBB31',                                 'DirNumber': '7020-Registered',                                 'DeviceClass': 'Phone',                                 'Model': 690,                                 'Product': 575,                                 'BoxProduct': 0,                                 'Httpd': 'Yes',                                 'RegistrationAttempts': 1,                                 'IsCtiControllable': True,                                 'LoginUserId': None,                                 'Status': 'Registered',                                 'StatusReason': 0,                                 'PerfMonObject': 2,                                 'DChannel': 0,                                 'Description': 'Africa MR',                                 'H323Trunk': {                                     'ConfigName': None,                                     'TechPrefix': None,                                     'Zone': None,                                     'RemoteCmServer1': None,                                     'RemoteCmServer2': None,                                     'RemoteCmServer3': None,                                     'AltGkList': None,                                     'ActiveGk': None,                                     'CallSignalAddr': None,                                     'RasAddr': None                                 }, ... View more

I am also facing same issue, Added few commands as below, but getting error. Would you pls. share with me, if you find any better way in displaying output ? result = client.service.selectCmDevice(stateInfo, criteria) for node in (result['SelectCmDeviceResult']['CmNodes']): for device in node['CmDevices']: print (device['Name'], device['IpAddress'], device['DirNumber'], device['Description']) If I just print (result) I am getting output as below output, I want to display output in proper way, onlt name, IP address, directory number and description But while adding "for device in node" I am getting error on this line as below; for device in node['CmDevices']: error is: Traceback (most recent call last): File "phone2.py", line 40, in <module> for device in node['CmDevices']: TypeError: string indices must be integers Pls. advice why TypeError: string indices must be integers ... View more

Hi Thanks a lot, it helped me. This is working perfectly with print(result) However, I have added few lines to display output in table format, so that I can copy the output and open it in CSV. Added few lines as below result = client.service.selectCmDevice(stateInfo, criteria) for node in (result['SelectCmDeviceResult']['CmNodes']): for device in node['CmDevices']: print (device['Name'], device['IpAddress'], device['DirNumber'], device['Description'])   If I just print (result) I am getting output as below output, I want to display output in proper way, onlt name, IP address, directory number and description But while adding "for device in node" I am getting error on this line as below; for device in node['CmDevices']: error is: Traceback (most recent call last): File "phone2.py", line 40, in <module> for device in node['CmDevices']: TypeError: string indices must be integers   Pls. advice why TypeError: string indices must be integers ... View more

Hi This is working perfectly with print(result) However, I have added few lines to display output in table format, so that I can copy the output and open it in CSV. Added few lines as below result = client.service.selectCmDevice(stateInfo, criteria) for node in (result['SelectCmDeviceResult']['CmNodes']): for device in node['CmDevices']: print (device['Name'], device['IpAddress'], device['DirNumber'], device['Description'])   If I just print (result) I am getting output as below output, I want to display output in proper way, onlt name, IP address, directory number and description But while adding "for device in node" I am getting error on this line as below; for device in node['CmDevices']: error is: Traceback (most recent call last): File "phone2.py", line 40, in <module> for device in node['CmDevices']: TypeError: string indices must be integers   Pls. advice why TypeError: string indices must be integers   ... View more