Voice Systems and Accessories - Small Business

Hi guys,Right now, I'm offering a solution that contains a UC540 system for 13 users. I know that the 540 may support up to 32 users. However I'm not able to get the PL of L-UC-PRO-8U= in the configurator tool, I need to add this in my solution and h...

All,We were given some 7960 phones that were previsouly setup for SIP connections not on a Cisco platform.  The phone was reset back to factory defaults using the 12345... code upon phone boot, but now the phone will not register on our UC520.  The p...

Hello!We have the following problem now:If i put the phone in Cfwd, and i enter the number, the incoming calls are forwarded well, but without a ringback tone.Can someone help me to give back ring back tone?Calls are from voip to pstn. Asterisk -> Vo...

My 3550 switch PoE is pre-standard.  Have been looking for a Cisco power injector to support this.  Tried using the AIR-PWRINJ3, but the power adapters plug that came with the AP541N does not fit the injectors connection.  What Poe Injector is compat...

I tried to factory reset my SPA525G but it freezes with 'Factory Reset Rebooting" on the screen. I tried power cycling it and it will not get an IP Address then keeps restarting. I also tried pressing the speaker button as it is powercycling (once th...

I am working on an install where the the receptionist phones have multiple appearances representing multiple companies.  When configuring the SCC Operator, I see that there is an option to display text on hunt groups.The text only shows on the screen...

Is there going to be any more updates for the (formerly Linksys) SPA-941? - The last firmware is 5.1.8 which is very old and missing a lot of the features of the newer firmware (such as LDAP searches) that is available for the 9x2 series.TIA :)

Had an issue setting up XO SIP configuration on the UC560 using CCA2.2(5).  I was in the process of turning up a XO Communication SIP circuit.  Basically CCA was not sending the password correctly to the UC.  Had to configure the SIP password using C...

- I cannot seem to get 2 profile rules working.- I would like to set one up for Global settings across all phones and one for phone specific information.- If I just have the spa504G.cfg with one profile pointing to the spa$Ma.xml it works fine.Is the...

We configure to use 4 nos WIP310-G2 as a SIP extension in Avaya IP Office 500 connecting via WAP4410N (Access Point connected to the Cisco POE Switch). The Call made from the WIP310 is drop after 2 Mins. Also we got a delay disconnetion of the Line i...

Where does one go to download the Cisco Smart Call Connector Advanced Client (SCC-Advanced client).All the links on Cisco's website take me to Cisco Smart CallConnector Operator.Its supposed to work with Cisco Smart CallConnector Server 1.6.0.58, rig...