The file is bin and not exe like in other upgrades.With Upgrade Enable: yes I added an upgrade rule: https://www.mysite.com/spa50x-30x-7-6-2g.binI save all changes but after reboot no update starts...
I have contacted VMWare who state that they cannot find this server in their compatibility list. I know that Cisco certifies these two versions. Has anyone successfully installed 6.5 or 6.7 on a BE6000 server?
I have my SPA232d setup to dial via my PSTN line or SIP server depending on dial plan. I do not have a PBX or anything fancy like that. It receives calls perfectly on PSTN and dials perfectly via SIP.However, it only dials out correctly via PSTN 90% ...
Hi. I have a SPA504G phone with version 7.5.2b installed. I want to update to version 7.6.2SR7. I have downloaded the .zip file but inside there is only a .bin file, there is no .loads file or an .exeHow to update?Thanks and regards
Dear Cisco community, I hope someone can help me. Our service provider Deutsche Telekom recently wrote us that we will not be able to make calls any more within short term. The reason they give is that our hardware (Cisco / Linksys PAP2T) is using a...
I am not sure if I am posting this at the correct forum but here goes. We are a small business that are running a Yeastar S100 PBX which is behind a Fortigate firewall. There are multiple trunks configured on the Yeastar S100 which are then routed to...
Hello, I have Cisco SPA502G IP phone in different branch. I'm trying to register the phone to my third party PBX system by using company DDNS. The Cisco phone and the PBX located in different locations and different network. I already setup the ext...
We have 3 phones in our office and the phine will randomly update itself at all times of the day rendering itself useless.Also the phone will not transfer a call. The second XSFER option never appears.
Firmware 1.2.1.004I have 2 spa112's that came back from the field Neither of them will pick up an ip address via DHCP, I tried on multiple routers. The ivr 110# says 0.0.0.0I also tried setting the ip to static via IVR101# 1# (this sets to static ip...
Hello everyone,Since this morning I couldn't access my hypervisor (ESXI) on the web. So I restarted the server.The problem is that it can't load VMWare ESXI, it boots directly in network mode.Thanks, please it's urgent all my VMs are off.
Dear Sirs,i'd like to become BLF lamps on an attendant console SPA500S Orange (Solid) when an extension is in the state UNAVAILABLE.Which string i need to send from asterisk to phone via SIP Notify Subscription to achieve this goal?Thanks in advanceG...
Hi Support Team, We have recently purchased SPA501G and have to enable LLDP-MED configs and enable Web Interface for config page.I am not able to find out the IVR code for LLDP-MED enabling.And also, I am looking for how to enable Web Interface link(...
We changed patch cables / Power cards After Changed its not working *We forget the port removed from UC540 Before it was working Fine Now Phones are Connecting... How to choose smart port ..? Even i choose smartport - Connected directly to phone its...
We lost the guy who was managing our Cisco products and I am trying to fill the gap for now. Several users in the organization have had name changes due to marraige and they have asked that I update the phone system so their proper name is displayed ...
Hi Have been gifted a SPA 504G phone - older phone but works great, updated the firmware to latest and bought a Jabra Evolve 30 headset to use for those long calls where you need handsfree All good except when making calls I have to use speakerphone...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: