I've been working on setting up VPN connectivity to our office location to which we bought a Cisco WRV210 (small office location with ~5 users). I initially tried out the QuickVPN software which worked on the first machine I tested it on. From there I've been getting problems with plain not being able to connect from another machine on the same network and the error "The remote gateway is not responding. Do you want to wait?" without doing any noticable changes.
I then tried out the vpn client TheGreenBow where I followed their guide here
I followed their instructions and tried out an evaluation of their software, and VPN connection works. I'm able to do RDP to a machine on the network (using IP address, not machine name) and ping the router etc.
Using this solution (although I would prefer the QuickVPN solution with seperate user login) I have two issues:
I don't seem to be really on the LAN like I normally would. I can connect to the routers web interface and ping it on its LAN IP, so I'm definitely connected over VPN. But I can't connect to other windows machines using typical windows networking facilities. I can RDP to a machine but only by IP address, not machine name.
Second, when I log onto the VPN, I would like to force all traffic to go through the remote gateway since our setup requires us to because of IP restrictions of some public platforms. Using TheGreenBow I found the following which looks like a solution
I recently ran into an issue on ISE 2.3 Patch 5 when trying to modify a Hotspot Guest Portal that had been created in the ISE Portal Builder.
The support people with the ISEPB team gave me the answer, so I thought I'd save someone a...
The Security team is pleased to announce the Cisco Firepower Threat Defense 6.2.3 Attack Lab v1.2, available in all datacenters.
The lab is aimed at technical decision makers, security engineers and CSOs with an interest in security technology. Th...
How to create a CSR using openssl
A CSR is a Certificate Signing Request and it is the first step of many steps in creating an X.509 certificate. When a CSR is created, the first thing that happens is that a private key is generated which is stored ...
Thanks to @Arne Bier for this document.
Setting up SMS notifications for Sponsored Guest access can be quite trivial. In the case of MessageMedia (an Australian SMS provider) it was one line of configuration in ISE. The...