ASA with Dual ISP One Static for VPN and one Dynamic for the rest
I need some help for a ASA Config.
i have a ASA 5510 with 8.4.4
Two outside Interfaces call outside-vpn (static IP Address) an outside-DSL (dynamic IP Address).
One Inside Interface call inside :-)
I have a default route for outside-dsl for the www traffic.
i have a vpn site to site tunnel to a outside office. There is a static route to the peer (300.300.300.300) in the outside
office over "outside-vpn". That works fine.
Now my problem...
I have some Remote Access Clients with Cisco VPN-Clients. They connect it to the static IP Address from the outside-VPN interface.
That`s not work. The log tell me "Routing failed to locate next hop...."
The remote access clients get their dynamic IP from the local ISP`s.
Can anybody help me!!!!!What can i do???
The ASA Routing Table
Gateway of last resort is 10.10.10.1 to network 0.0.0.0
C 600.600.600.0 255.255.255.248 is directly connected, outside-VPN C 10.10.10.0 255.255.255.0 is directly connected, outside-DSL S 300.300.300.300 255.255.255.252 [1/0] via 600.600.600.1, outside-VPN S* 0.0.0.0 0.0.0.0 [1/0] via 10.10.10.1, outside-DSL
Radius server configuration for 802.1XServer radius test1Address ipv4 10.1.1.1Key 1234!Server radius test2Address ipv4 10.1.1.2Key 1234!aaa group server radius TEST-grserver name test1server name test2!aaa authentication dot1x default group TEST-graaa aut...
One of the biggest concept in VPN Technologies is NAT Traversal, like NAT Traversal in VOIP deployment with SIP Protocol, the history is always inside the payload to solve the Incompatibility between NAT and IPSEC like the Incompatibility between SIP prot...
"What is this 'Orbital Query Corner' thing", you ask? It's the name of an occasional series of articles, each discussing one particular point or use case for the Orbital advanced search feature that is available in Cisco Secure Endpoint starting at ...
0. The Issue
On 20 July 2021, Microsoft issued an alert for CVE-2021-36934 "Windows Elevation of Privilege Vulnerability".  The problem in this case is an overly permissive Access Control List (ACL) applied to system files, including the Se...