VPN

Hi Everybody,I have a problem to configure reverse telnet in cisco 881g router witch have the Console and the Aux port in the same physical port.How to ensure that the aux port in use instead of the console port ?My need is to access to a cisco switc...

Hi, I'm testing a point to point IPSec connection using a SVTI configuration with QoS applied to the physical interface. The physical is an STM-1 link with AAL5-SANP. The QoS policy is applied to the PVC vbr-nrt.Under load testing (generating 8 x IP ...

We are facing a problem with our cisco anyconnect vpn. Our network setup is with a load balancer and a ASA. We configured our 2 ISP in load balancer and the nating is also through it.we had done a static nat with a public ip to ASA for site to site V...

I'm attempting to create a Hub and Spoke VPN configuration with several ASA's. I'm able to successfully get the hub talking to both spokes and the spoke talking to each other. This configuration is for a network whether the hub is a service provider ...

We are looking at allowing iPads to be used as personal hotspots for our field staff instead of MiFis. Our iPads have access to connect via a VPN connection. One of our tests was to connect to the VPN on the iPad and then connect a laptop to the hots...

Hi,This is doing my head in!!!Users on AnyConnect cannot access a website that is on a site-to-site.  I have been through all the hairpinning techniques but with no luck.We terminate all our VPN on a ASA which has ANY ANY access-lists, that has a def...

Hi All,Can some body help me in configuring my router for L2L vpn on a cisco router vrf with ASA on remote site. Attached is the my router configuration can somebody help me to build the configuration on router and ASA. Router is configured with VRF ...

Just inherited an ASA 5515-x and have a quick question. The default access list for  inbound traffic is set to: access-list outside_access_in extended permit ip any anyWell, my alarm bell immediately go off when I see this. Just want to ensure the ac...

I have a network with 2 Firewalls, an old one (I think Fortigate) and a new Cisco/ASA (5515, 9.1.2). Different VLANs, one of which is for "Server" and one is the DMZ. Both have NATs (over 40 object-NATs, PAT in reality) to publish services. The defau...

Cisco ASA 5515-X AnyConnect VPN with LDAP authentication (2 Domain Controllers).I need to use LDAP-S to get the password-management.At the ASA side, it is sufficient to enable LDAP over SSL.On the Domain Controllers (2 Windows/2008) to enable LDAP-S ...

Can this configuration on ASA be a cause of a "%ASA-2-106017: Deny IP due to Land Attack from 17.18.19.20 to 17.18.19.20" syslog message. interface Ethernet0/0 nameif outside security-level 0 ip address 17.18.19.101 255.255.255.128 standby 17.18.19.1...

Hello,I have VPN Cisco and Interaction workspace that I use for work from home, I have wireless internet connection, I have a wireless laptop I use for personal reasons and I have a wireless desktop that I use just for work.When I log on to Cisco VPN...

I have a Cisco 5520 that I have RSA radius with hardware token up and working witrhout issue. The RSA radius authentication works fine.My problem is that I want the login page of the WebVPN portal to display two fields for the user RSA passcode. An R...