VPN

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco CyberSecurity

Labels

Forum Posts

I have a new customer that needs to send data to us occasionally, we normally install the Cisco VPN Client on their PC, but this customer has the same private network we do.I know this could be done with NAT Policy on my ASA 5510 with a site-to-site ...

wcotis60 by Level 1
  • 8749 Views
  • 25 replies
  • 0 Helpful votes

ASA-SiteA-Outside int: 4.5.6.7inside int:10.1.1.1dmz:192.168.0.1 255.255.255.0routes onASA-SiteA----route outside 0.0.0.0 0.0.0.0 4.5.6.7     ----------default routeroute inside 172.10.1.0 255.255.255.0 10.1.1.1---route to reach the ASA-SiteB- inside...

Hi,I have a site-site VPN tunnel between my location and my remote office. My remote office is changing their ISP, so the VPN GW is getting changed. do i need to create new site-site tunnel again or changing the remote peer VPN GW in my FW is enough?...

Hi AllIm having trouble pinging an IP address through my router to rouetr vpn tunnel, im matching traffic both sides and it seems setup properly, the user says they can access the pc they want but i cannot ping it. is there any debug commands I can u...

Hi,I have a question about log messages I am receiving on our ASA 5520. Users are not complaining about VPN not working, but the following messages are appearing:Jun 15 2012 12:12:05: %ASA-3-713902: Group = (Group), Username = (Username), IP = (IP), ...

On an ASA, version 8.2(x), for a given VPN tunnel setup with a peer of a.b.c.d, and the interesting traffic defined as source s.t.u.v and destination w.x.y.z (and the w.x.y.z address(es) does NOT include the peer address), if host s.t.u.v, tries to a...

Hello - I currently have a custom homepage for our SSL VPN with multiple internal web links.  I would like these links to open as smart tunnel links.  I am able to do this through bookmarks, but cannot figure out how to do this on a custom page.  Whe...

j_puzio42 by Level 1
  • 994 Views
  • 0 replies
  • 0 Helpful votes