VPN

I have a linksys WRVS4400N VPN gateway installed on my network edge. Now i need to connect to it using a VPN Client over internet. But don't have a client. Can anyone tell me which client to use & wheere to download it from?

Hi Does,  Cisco 3640 supports SSL VPN?according to this link, 3640 doesnt seems to supportedhttp://www.cisco.com/en/US/products/ps6496/products_configuration_example09186a0080720346.shtmlPLease advise

I'm having some issues with configuring DHCP on the WAN port (Fa4) on a Cisco 871W. Basically, I want to configure this unit locally, so I can ship it to an existing broadband user to just plug in to their Broadband modem and hey presto, it will work...

Hi there,can anybody tell me if the Anyconnect Client is supporting IPSec VPNs? As I understand it Anyconnect is a SSL-Only client.If this is correct I probably need a number of SSL Licenses on my ASA box?It would be great if somebody could clarify o...

I have Site A whose VPN router has two VPN tunnels built to two sites. To Site B it connects to a VPN Concentrator with a site to site ipsec tunnel (doing reverse-route injection), and to Site C it connects using a GRE tunnel and runs EIGRP over it. ...

Hi,I have just configured an IPSEC VPN between our head office and one of our remote offices. The main purpose of this VPN is to route ALL traffic from the remote office via our head office and then on to the internet. This way we can control all tra...

Hi All.We have just setup a IPSEC tunnel between 2 locations.  The tunnel itself is up and stable but i'm having issues when trying to connect to certain webpages at the other end of the tunnel.  It seems as though i need to ping these devices or ser...

here's a basic network diagram:*internet* ---- [cisco 831] ---- [pix 501] ---- *internal network*i want the ablity to connect to my network when i'm away from home.  i configured the pix and tested it; i can establish a secure tunnel.unfortunately, i...

I'm pretty familiar with setting up a VPN but a customer asked if we could NAT our servers to a range they provide and I'm not sure how this can be implemented.Here's our setup (sanitized):our side (10.1.1.0/24) <---> ASA <---> router <---> Internet ...

hello,i have a problem whit mi easy vpn client is down every 10 seconds an appear this this message in debug:*Mar 11 08:50:33.557: ISAKMP:(3005):purging node -1308217119*Mar 11 08:50:41.345: ISAKMP:(3004):purging SA., sa=83A4B344, delme=83A4B344regar...

hi all,i configured asa 5505 with remote vpn clientand i used these vpn client to connect avaya vpn hard phones and i connected 4 phones using same username and passwordif i connect 5th phone it is not connecting and if i try to connect cisco vpn cli...

I have been reading that as of Pix version 7.0 PPTP is no longer supported. can you tell me what the alternative to using PPTP would be?Thanks in advance,Dave