VPN

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco CyberSecurity

Labels

Forum Posts

I have a new gateway NV59 series win7 laptop that was successsfully configured to connect with my DLINK router. As part of some work to setup a VPN for a small business, I downloaded and installed the QUICKVPN v1.4 for win7. After I installed it, my ...

Hi All, I have to connect a L2L to another company however, they want us to NAT our internal host to another subnet. There may be some address conflicts on there side. They want us to Nat my 192.168.200.0 subnet to 10.10.12.0 subnet. All class C's fo...

dan hale by Level 3
  • 864 Views
  • 3 replies
  • 0 Helpful votes

I've put the Anyconnect VPN client in place at my organization and for the most part, it's working well. We run two domains (DEV and CORP with a Full Trust) behind the firewall and Anyconnect refuses to query DEV for DNS or WINS. I've put both DNS se...

I have a cable modem and I need to install CISCO 871 behind the Cable Modem to make me access devices behind the Cable modem remotely.How can I do that. I am a beginner to Cisco products. I know how to communicate using CLI and SDM.Please help, if po...

Hello everyone,I have a small test lan with a 2611xm setup for a ipsec vpn.On each fe port I have one laptop directly plugged in, the inside int is assigned by dhcp, and the outside at this stage is static.I am using a 3rd party ipsec client program ...

DudesI've tested anyconnect vpn client connection successfully with AAA authentication.But I wanted to have certificate authentication in addition to AAA, with local ca confgured on ASA,what sort of certificates has to be applied to web browser?from ...

Resolved! VPN Config File

HiI have a quick question to ask, i have to transfer the config from one VPN concentrator to another one and i'm in the fle management section and i'm clicking  on the TFTP transfer but i don't know what commands to put in the fields.I see a box that...

We have a ASA 5520 runningCisco Adaptive Security Appliance Software Version 8.2(2)We have a split tunnel using IPSEC to access our internal network. The access list for the tech group is pretty simple:access-list xxxx extended permit ip 10.0.0.0 255...

gginty by Level 1
  • 1845 Views
  • 3 replies
  • 0 Helpful votes