I need some help. I have been searching for a tool or aplication that will output a log or report of user history....logins and out.......I cant find this tool does something like this exist?
Guys,I have two 2811 VPN routers connected via several switches. Static crypto maps and isakmp keepalives at 10seconds.Tunnel is up and working, encrypting traffc between loopbacks on the 2811s when I do extended pings.Everything works fine. I do a ...
I am trying to setup VPN on my PIX 515e and I believe I am almost there but not quite.I currently can connect to the PIX with a VPN client on the outside but I can't ping a PC that is on the inside.Inside: 10.0.0.1Outside: 10.0.1.1I created an ACL te...
Hi,I have two 2304kbps sync'ed SHDSL Cisco 878's in our lab direct connected to a DSLAM.The maximum data rate that I can reach on the ATM0 interface of each 878 device is as per below 2041kbps, beyond this I get output drops. I am generating 1000B u...
Hello,I have a user that VPN's in and everything works fine. The only thing that does not is another email account he has in outlook. HE can not recieve and send mail from that account. Is there a way to allow this when he VPN's in? vpngroup xxx a...
I got a calling saying a site to site vpn went down at lunch time. here is the output from debug crypto map iskampanyone got any ideas why phase 1 wont establish. apparently the config has not changed004135: Oct 16 15:46:18.252 GMT: ISAKMP:(0): SA ...
How can I configure idle timeout for IPSEC sessions. The configuration only allows for idle timeout for webvpn but I don't see where for IPSEC sessions.
I have one proxy with two NICs, an with ip 192.168.2.0 and other with ip 192.168.1.0, the default gateway of the proxy is, ip 192.168.2.115 , router of the ISP. I have an router that connect vpn clients ( pool 172.18.0.0 ), i have route in the proxy,...
Good morning, I'm starting to study for take the ccna certification.Could someone tell me the difference between PABX and isdn simulator and it's possible connect two router with wic ISDN by PABX?. I have a PABX with 4 internal ISDN line where are l...
Ok, I thought that I had setup everything I would need for a user to access my network behind a PIX 515e but I guess not.I basically gave inside and outside ports ip adds on their respective subnets. Created some ACL's applied these to a group and g...
Dear Sir,i have PIX configured to allow internal users to access the internet, and to allow external users to access internal FTP, HTTP and emailthe problem is that external users cannot access HTTP and FTPand the mails cannot recievedfrom outsidethi...
HelloWe are trying to establish a VPN tunnel between two Cisco 2821 routers with RSA-nonces authentication. Each test fails. In the debug crypto isakmp we can see the message "%CRYPTO-6-IKMP_CRYPT_FAILURE: IKE (connection id 268435471) unable to decr...
Can I download the Cisco VPN Client? If so where can I get it? I have visited the product center and founf the product. When I try to download it, I keep getting the log in screen and enter my credentials.
