VPN

Hi,One of my customer has Web based application which is hosted over internet on IP provided by ISP. Challange is in case, the ISP link fails webserver is not available. Customer is planning to add one more link from different ISP. How do I Load bala...

Do I need an additional license to use SSL VPN (SVC)? When I run a 'show ver' it says I have a max of 750 VPN connections allowed. It also says that I have a max of 2 WebVPN connections allowed. Which one of those applies to using the SVC client?

hi,so my vpn client connects to the router and gets an ip , 192.168.6.Xon the network I have 192.168.1.x, 5.x and 10.x but I can only access the 6.x stuff from the vpn client.when I do a route print on windows I can see that the 192.168.1.0, 5.0 and ...

Hello everybody,I'm new in the interesting world of cisco.I've spent some days to find out, how to deploy a cisco 836 ADSL over ISDN router with briding functionality, to do site-to-site vpn with a asa5510 behind the cisco 836. At the other side of t...

Hi,I use local authentication for the remote VPN access on an ASA. I want to know if it?s necessary to use a radius server for more security. Is there more security to use a radius server instead a local authentication?I'm new please help me.Regards,

Hi,We'd like to know how to disconnect Client VPN automatically when connected users do nothing during 5minutes.We've tried :group-policy Gr0 attributesvpn-idle-timeout 5user's always connected even if he does nothing.He gets no notification.Any hel...

Good morning,It was just brought to our attention that we have reached max sessions on the VPN 3015 concentrator (100 max sessions). I would like to swap this out with a VPN 3030 (1500 max sessions). But I have a couple of questions.1. Which entry...

Hi ,I have a site to site VPN and VPN clientsand for VPN traffic i got no nat and sysopt cpnnection permit-ipsec.I want to configure port based access-list for the vpn client for ssh access to one of my vpn clients to a machine onside my LAn network....

hello,I'm trying to configure my home cisco 2621xm to accept vpn connections. I've used many cisco pdf documents and they all same almost the same so I've done my configuration using these documents.now I just can't get past this error message I'm ge...

We have a VPN Concentrator 3005. One of the users is trying to connect to our network through wireless at a hotel. He was able to login through Cisco VPN client. However, he could not open Microsoft Outlook. Can you help? Thanks.Diane

We have an Cisco 837 ADSL router that connects to our Cisco Concentrator. The only way I can get the tunnel up is if a user turns there PC on that is plugged into the ethernet port on the back of the 837. If it's off and the router is rebooted the ...

I have 2 sites, each has ADSL static IP connection. At HQ, I use Cisco877-SEC-K9 and Cisco877-K9 at branch.I configured the Internet connection, then try to make a VPN tunnel between them for HQ-branch site-2-site connection, and teleworker (with Cis...

Hello,I am wondering if it is worth to buy additional memory for our 2811 routers. 2811 router comes with 256MB of memory and an embedded VPN moudule. We upgrade the IOS image to Advanced IP services in order to use L2TPv3.I believe that the 2811 rou...