VPN

Pix 515 6.3(3) has a pix to pix VPN, then, it has some vpn clients, all they are working fine, however, I need an aditional VPN to a VPN concentrator, and I have a problem, for security policies the partner which I need to connect does not permit my ...

Hi!I just got the VPN client connecting into the PIX authenticate direct to Active Directory. ( No radius in between)My problem is we want to selectively give VPN access to users in the AD. Right now, everyone in the AD can log-on via VPN client. in ...

I am stuck. I am trying to configure WebVPN on a ASA 5520 7.22. I would like for the client to https://myaddress and then utilize our Radius server to authenticate. I have the radius server setup and test, but I cannot seem to get the WebVPN to wor...

Maybe I'm being thick about this. I need to send traffic through a L2L IPSEC tunnel to a remote office location. My issue is this: I need to send a private subnet (10.5.1.0/24) through my L2L tunnel and then NAT that subnet to a public IP. I'm su...

We have a remote access VPN and a site-to-site VPN. Both work fine except that clients of the remote access VPN can not access hosts on the site-to-site VPN.We are 10.5.5.0Site-to-Site VPN goes to 10.2.2.0Remote access clients can access anything on...

I want to monitor the Mars with our Solar Winds management SW, I can?t find how to set the MARS SNMP community strings so it(MARS) can be polled by SW any Ideas

Dear Sirs, First, I'm not Bilingual so excuse my English.In ASA55xx. Can "Client certificate" be used at the SSL-VPN(WebVPN) connection?Best regards,

I configured Client to Site with Cisco ASA 7 with Cisco VPN Clinet 5.0. I was able to successfully connect to the VPN Server but i could not connect to any of the network inside. I enabled NAT Traversal but still i could not ping. I enabled IP and IC...

i'm setting up ipsec vpn (site-to-site) between a pix 525 and a 3660 for the first time. i'm setting this up in a lab environment. i have set up static ips only for simplicity. from the pix 525, i can ping up to 3660's 172.17.63.230 but not the LAN I...

My Cisco VPN Client software crash at some point. Everytime I'm trying to uninstall or either install the software in order to repair it I received the following error message:Error 28000: Before installing the Cisco Systems VPN Client 4.6.02.0011, y...

Hi there,I have a PIX 501 connected to the internet which is currently on the edge of the network. I have a client to which I want to connect using VPN so when PC on my network side request a particular IP, traffic passes through th tunnel. The oth...

I have a site to site VPN with PIX515E's as the termination point for each side. I am using DES encryption. There is a DS3 going into each site. I have lowered the MTU setting on both firewalls so that fragmentation didn't occur. All hardware is ...

Hello all,I planning on upgrading 2 different VPN3000's to the most current stable code. One of them is running 4.7 and the other is running 4.1.7H. I thinking of running 4.7.2L. Does anyone have any recommendations or caveats I might run into? Als...

I'm stuck and really having a tough time figuring out the VPN configuration. One of my friends was trying to help but he couldn't figure it out. Details: He has the Cisco VPN Client and can connect to the ASA5505, I have the Windows Client (XP Home) ...