VPN

OK, so I'm trying to do this:http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guide09186a00801d1cb5.html#1027184...with the -- 'set peer hostname.com dynamic'But the version of IOS I'm running does not support the 'dynamic' fea...

Hi, i have a router connected to a ADSL modem (internet) and have a ethernet (local network) and want configure this router how VPN server (authentication local user on router)i want a connection from internet (DIALER Interface o ADSL) to a router us...

I have the following problem, i have a Cisco ASA 5510 and use 3 interfaces of it, (outside, inside and DMZ) on the inside i have serveral VLAN'sNow i have configured VPN and that works fine, so i started to configure the DMZ for the mailserver. i fol...

I was given a point to point MPLS connection to my remote office. I setup a site-to site VPN, which partially worked.How can I force all traffic from the remote to go thru the main office router.They both are 2800.Thank you

I have Cat-6500 with Flex-WAN connected to 50 remote branches 2800/3600 RoutersRunning data and IP Tepelphony traffic I will implement VPN/IPSec. between HQ and branches using IPSec SPA on Cat-6500 and NM-VPN/MP for 3640 routers and AIM-VPN/EPII-PLUS...

We have a vpn 3000 that connects with four remote sites. Three are up and running and one has dropped off. The following is an error we see at this end; 46177 06/19/2006 07:52:01.330 SEV=5 IKE/1 RPT=36551 x.x.206.125 Received Invalid Cookie notify ...

I have configured a Tunnel between Cisco 2821 and Nortel Passport 2430. And tunnel is on a VSAT media. There is no physical link between these routers. Tunnel is showing up but LAN to LAN pinging is not happening. Please can anybody help me out.........

HiI have the following setupInternet connection --- router --- pix --- internal networkThe router - pix is on 10.10.10.0 and the internal network is 172.16.1.0, pix ip outside 10.10.10.75 internal 172.16.1.1.I have set-up my PIX so that this accepts ...

One of my customer is in process of purchasing one unit of Cisco ASA 5500 series Adaptive Security Appliance for their office, where they are not in need of Anti-X edition but require IPS, VPN with minimum of 4 Ethernet interface.As looking into ASA ...

I have to setup ISDN as a backup link for Leasd line.can you please write me exact simple command that I have to configure in both routers.I have 3745 router in Central office and 1841 router in branch and both have the ISDN CARD.Please help me.

Dear All,Cisco 3745 router is not detecting the NM-16AM card. The IOS on router is 12.3 (9e).Kindly let me know the solution.With RegardsAnand

Hi Cisco Comrades,In a Lab envirement I?am trying to set up router to touter vpn connection with CA authentication.1 st problem:When enrolling with CA (server 2003 CA) both router received requested certificates but with a log that the certificate en...

I need to change the default timeout for VPN users connect through PIX 515 to automatically disconnect after 15 minutes of inactivity. I want to checkif this is the right command that needs to be added :"timeout uauth 0:15:00 inactivity"Appreciate wi...

What ports need to be opened in the VPN routers access-list to allow voice traffic to pass through.

I want to know how to use connection client vpn and site-to-site on the same route, and etablir a sessions client vpn and site-to-site in the same time(weather).Thank you