VPN

Hi All,I am building a site-to-site VPN using Microsoft CA. One end is Cisco 2811 router and the other end is PIX 6.3(4). The Microsoft CA is the Sub-CA with a 4096 bit root cert. I use SCEP to obtain certificate. It's work on the 2811 router but fai...

i have a central site that is connected to a X25 network by three links (three dialing numbers availible)also i have three remote site eachone with one lin to the same X25 network.i like to balence charge whithin the three links to the central site (...

Hi. Is there any client currently running on Windows 2003 server?

Dear all,I try to configure a 3640 (IOS: IP PLUS 12.3(16a)) to accept more than one call using dialer profiles. Here is my config:http://rafb.net/paste/results/JNrw5m76.htmlAnd here the log-output:http://rafb.net/paste/results/dX9Usb22.htmlWhen a 2nd...

We are using the internal database of the VPN3005 for authenticating Cisco VPN Clients (v4.8). However, their passwords are set by the administrator of the VPN3005 and from a security point of view they should be forced to change the initial password...

We have several clients that need to VPN back to various coporate networks from my DMZ through and interface using PAT. Most are trying to use a cisco client using the normal ports ESP, UDP 500. Do these clients need a static translation or will it...

i know the router can use NBAR, i want to know ASA5500 can use NBAR too?

HiI have two sites connected by VPN's with some 877 routers.192.168.130.x -- 877 router -- INTERNET -- 877 router -- 192.168.140.xwhen on the 192.168.130.x network and trying to get to the video camera system on port 80 on 192.168.140.200 or vnc to t...

something happened to my OS and I'm getting following error mex:1 21:48:09.395 05/17/06 Sev=Warning/2 CM/0xE3100002API Failure - Function call ControlService returned 10622 21:48:09.505 05/17/06 Sev=Warning/2 IKE/0xE3000099Failed to act...

Comment faire pour utiliser outlook 2003(pas OWA) pour accéder a un serveur exchange a travers un WEBvpn ASA 5540.Cordialement,

can we have privilege level for vty passwords.......

I have a VPN setup where the tunnel flaps once in a week, the whole tunnels go down and come up again after some time of inactivity.I was wondering like why is this happening, the version of the HUB router and the remote routers are different, could ...