VPN

Dear All, We currently have VPN tunnel accross a 1Mbps internet connection between 2 Loactions which are 400msec latency apart. On file transfer between locations we get not more then 400kbps speed. Is it limited due to latency figure. I refered to t...

Hi, I have a problem with a 2611XM router.Two day ago the router has stopped working as it should.I wasn't able to get ping responses from any of it's interfaces and it wasn't routing any packets.After rebooting I got the following errors: Nov 11 ...

I am setting up a newly acquired PIX 506E. I am tring to create a VPN link to a Netscreen 50 box. The problem I am having is that Phase 2 keeps being retransmitted. I don't have any control over the Netscreen, so I just want to make sure that everyth...

using pix version 7.0(1)For one of our client to be remotly connected through the pix unit,is there any way to force user to require pix authentication before the connection is allowed,something like,Telnet in one port to the pixusing user+password a...

thank you

dear sir:i am using pix (525) with ios 6.1 , i configured vpn tunnel between it and another firewall and it work good , and i also configure it as client vpn server and it also work , but when configure Xauthentication (crypto map client authenticati...

Yesturday, my office changed ISP's for the office network. With both ISP's we have a static IP. After the change, I updated our Pix 501 with the new IP/Gateway/Netmask etc. Everything works with our new ISP (NAT, inbound and outbound rules) except fo...

Hi,We have a pix at our main site that is a central point for all site to site vpn's. there are currently about 25 site to stie VPN's working ok from this pix to cisco routers.we have added another cisco router to a new remote site and altered the pi...

We tried to establish the site to site vpn between cisco 3005 concentrator and checkpoint firewall. we got a error "IKE: Quick Mode Sent Notification: invalid information" from both side. We checked both end config. is identical but still we got same...

I have a functioning IPSec tunnel between two pixes. One is a 525 running 6.3(4) of the code, the other is a 515E running 7.0. The tunnel comes up OK, but if it drops because of a lack of interesting traffic, the tunnel will not come back up UNLESS...

Are License keys specific to the Software versions for PIX? orDo I have to have a license key which can be used in a particular software version for PIX

hithere is a pix in H.O 515E. clients are connecting through Cisco VPN client.in my branch office internet connection is through ADSL.from this site only one client can connect to the H.O . If one more client want to connect then he is not able to co...

Hi,diagram like thisR1-----------ISDN---------BRI-R2R1...........ISDN.........BRI.R3R1...........ISDN.........BRI.R4R1 has 3 PRIsI want to setup multilink interface plus the PRIs will dial out the ISDN if other primary link goes downwho has a configu...