VPN

I know that only four notification types (traps) are currently available (e.g. IkeTunnelStart & Stop and ipSecTunnel Start & Stop) but does anyone have any idea when the remaining ones from the draft RFC (e.g. ikeSysFailure, ikeCertCrlFailure, IkePro...

We have some people using the Cisco VPN 3000 Client and finding that their connections are dropping after a couple of minutes. MOST others are having no problems with no timeout issues. Everyone is in the same user group (we only have one) on the con...

Hello There:I got the same message ” Failed to establish a secure connection to the security gateway" trying to connect to our Cisco 515E PIX box using the two Cisco vpn 3.6 clients. I downloaded the VPN 3.6 client with the Installshield with the ...

Is it just me or is it a nightmare configuring this with any type of standard configuration. Cisco, you have samples on your web site but those aren't real world config's! Most VPN customers use NAT+FW+site to site VPN+ Client VPN. Yet try to configu...

I have the above configuration and followed to the tee the tech note:http://www.cisco.com/warp/customer/471/ios-unity.htmlI can now connect, prompted for username/password, get assigned an address and my client says its encrypting the correct packets...

When I establish a VPN trough a dialup connection everything works fine. If I connect from a PC connected to the LAN it connects but no traffic is going to the remote site and I loose all network connections on the PC which is running Windows2000 Pro...

Is it possible to setup a VPN between two routers running NAT on both ends?

i had a cisco 2600 running 12.2(5d) version, the IOS file support just IP,now i want to built a vpn between two routers (2620).so i take a 12.0(5) XK1 that support IPSec and 3DES.i instal this new IOS file in my routeur,using COPY tftp flash.....i di...

What is the cheapest but most reliable radius server to use with pix 515 and vpn 3.x clients for external authentication. I just found out that the pix does not authenticate vpn 3.x clients locally like the router ios does. So now i need a good but...

we want to connect our branch offices over vpn to our central office. In the central office there is a VPN concentrator located. In the branch offices DSL is present. We want to operate the branch offices in the network extension mode. Now the questi...

Hi,I ve a problem:I want to make a VPN remote access from VPN3000 soft. Client and a PIX.I've configured properly the pix and all works well. Now, if I want to deny that the clients can contact some services on some host on the inside PIX network, ho...

I've got a Win2K domain policy that requires periodic password changes. Users who connect through the concentrator are only notified when they open up Outlook since they don't start the client software until they login. However, once they change thei...

any one could advise me the VPN configuration within cisco 1720 with Cisco 3.02 vpn client.I manage to build up the tunnel but I can't ping to the internal network. please advise.

hellocan IPsec of a PIX work with ip sec of baynetworks router s(ARN, ASN,...)?over ip wan (LL, FR, X25,ISDN,...)does any one test it?

I've noticed that the Cisco VPN client will not co-exist with the Nortel VPN Client or the AT&T Net Client. Is there a reason for this? Is there a way to work around this if a vpn client other than cisco is needed on a particular laptop?Thanks.