VPN

I have a 2620 with a 16 port async modeult for RAS dialin. I also have two T1 WIC's that I use to connect to a remote site (ppp multilinked). Can I setup the router to provide authentication for the PPP dialup users but not on the two T1's? I can't f...

Hello,perhaps this setup is not possible? I am trying to use the built-in IPSec on a XP client to connect to an IPsec router using des and md5. The client must get to the router (tunnel endpoint) through another router performing NAT on it's interf...

Hi.Has anyone found a smart way to handle large number of SA's and peers on a PIX VPN installation?Example: To check if a SA has been created you have to issue a "show crypto ipsec sa". This will list all SA's on all peers, in my case about 250 SA's ...

hello VPN IPSEC Guru !do you know the Bandwith average on one IPSEC Tunnel ? are there a calculator modell (IPSEC - Bandwith) ThanxAlain

New to VPN, I would like to establish a VPN from a remote site using a 2516which can be replaced with a 2620. The remote site connects to central using T1, when the T1 fails I would like to establish a ISDN VPN to the central site. The central has a ...

A client of ours currently has Lucent IPSec client with pre-shared key config on a PC and the PC has a static NAT to one of the public IP's, however they have a 2600 router and a limited number of public IP's. Now there is a need for 6 other PC's to ...

Hello,I need to know if it is possible to configure cisco routers to create an IPIP (IP in IP) tunnel over an IPSec tunnel, the remote end-points of the two tunnels possibly different. It seems to me that similar functionality can be provided by usin...

I'm running the VPN Concentrator 3015 using IPSec w/digital certs. I am able to connect to my network without problems and I am able to access anything in the network. However, I am unable to browse the Network Neighborhood and change my password w...

I have 2 Windows XP PCs connected to the SMC DSL router. The machine #1 has a VPN 3.5 client installed. The machine #2 doesn't have VPN client installed. The machine #2 can ping the router and the Internet. It can't browse shares on PC #1 and can't p...

Configuration of PIX as a VPN Gateway with Win2K CA Server as a Certifying Authority and client for PIX(VPN Gateway) as Cisco VPN Client 3.0.3(A) Software.Is there any requirement of 3DES for configuring Win2K CA Server and PIX VPN Gateway for a VPN ...

Can anybody help me in configuring a remote access vpn for pix 501 firewallPlease let the full procedures or step by step configuration of pix 501.

HiWe have a PIX 525 that has an IPSEC VPN terminated on the outside interface. Clients use the Unified 3.5.1c.k9 client to connect with the PIX which they can do successfully and access resources on the inside interface.We also need to access anothe...

I have installed this same version on my machine and at least 6 other users have it installed on their Win2k machines. All Win2kPro, SP2, all are local administrators of their machines. The last person to try and install has no problems installing ...

new in the enviroment, wants to know about vpn

I am not sure if this is the correct place to ask this question but here goes. I am looking to implement a vpn concentrator into the school district that I work at but I was told by someone that you can do the same thing on a 2650 routing using IOS? ...