We are implementing a VPN and have a requirement to test it prior to implementation. I am the QA Manager and need help on how to approach the test. Any help would be appreciated. Thanks. Jess
We are implementing a VPN and have a requirement to test it prior to implementation. I am the QA Manager and need help on how to approach the test. Any help would be appreciated. Thanks. Jess
I have a VPN using a pix 515 and 506 both running ver 6.1.1, with lotus domino servers on both sites. replication from the 506 site work across the VPN but it does not work in the other direction. These servers do replicate accross a lease line?Any ...
This scenario involves a Concentrator 3000, HW 3002 Client, and Software Clients via dial-up.I have a VPN Concentrator 3000, and I am using all three Network ports. I have the public port (#2) as the default gateway.Any traffic that tunnels into por...
Does anyone know...if it's possible, using one of the Pix series firewalls to create both a lan-to-lan tunnel as well as accept incoming VPN requests from the Cisco Secure VPN Client?Right now we have a Pix 506 (in a remote office) creating a L2L tun...
Can anyone tell me if it is possible to use an ACL of "permit ip any any" to tunnel all external traffic from one site to another on the PIX units, with ACL and NAT examples? Currently, my ACL and NAT config are as follows:access-list 140 permit ip 9...
I have not seen any specific doumentation on this. Can you set up a remote access IPSEC VPN using the Cisco VPN client v3.5a with the IOS Firewall Feature Set? How about just IP Plus IPSEC 56?
Two weeks ago, I was able to reach a 3rd party vendors URL. Since then, we have implemented a router to router VPN with said vendor. Now I am no longer able to reach this URL. Their router sits outside my firewall and is connected to their homebas...
OK, I'm very newto theand have read the documentconcerningthe VPN client and all, but I have a couple of questions.What the heck is a "bypassed packets" - iknow what the books says, but does that mean they did not enter the VPN tunnel and were proce...
I've tried installing versions 3.0.3, 3.1, and now 3.1.2 and am running into the same problem. Over VPN, I use Lotus Notes R5 for E-Mail and without VPN, I use Outlook 2002. In both cases, when I try to send mail, the connection to the mail server ...
Dear all,I tried to make a VPn tunnel with our remote office using pix to pix, seems that phase 1 has passed but some problem with phase 2. Belows are the debug output, does anybody have any idea?PIX(config)#VPN Peer: ISAKMP: Added new peer: ip:remot...
Hi,My client is a large manufacturing corporation with National HQ in Australia, and Global HQ is in Japan. The Japanese proposal is a 1MB FR link from Australia to Japan. This will cost nearly $500k AU/yr.We currently have a 2MB Internet connectio...
Does someone have a good configuration example for a C7140 with the ISM and ISA Module ? I'm particular interested in the controller ISA configuration.Many Thanks !
I am trying to set up a client VPN to my pix 520. I've been trying to follow Cisco examples, but they always configure fifteen different client on one pix. Can someone please post their confige for the VPN. I would prefer the vpn conc. 3 client, but ...
HiI'm wondering if we can use Windows XP Professionnal built-in VPN service to connect to a Cisco 3000 VPN Concentrator?Thanks.
Hi,I am setting a VPN connection from Cisco VPN client to 1720.Q1. Is there any sample configuration on this scenerio? At this moment users want to connect to internal network from somewhere on the Internet.Q2. If there want site to site VPN connecti...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
08-18-2024 04:32 PM | ||
08-15-2024 02:55 AM | ||
08-13-2024 10:09 PM | ||
08-13-2024 01:46 AM | ||
08-12-2024 10:32 PM |
User | Count |
---|---|
7 | |
5 | |
4 | |
1 | |
1 |