Hi All, I'm currently testing on ssl vpn using anyconnect client. The requirements are 1. AD Authentication - Done and working 2. Specific group of users using AD security groups will be allowed to connect to ssl vpn - Authentication is working h...
Hi All, I'm currently testing on ssl vpn using anyconnect client. The requirements are 1. AD Authentication - Done and working 2. Specific group of users using AD security groups will be allowed to connect to ssl vpn - Authentication is working h...
Hello, We are looking at using Cisco 1941 for our office connection to our VPC in AWS. We will use the router as our customer gateway device usig BGP.Do we need Cisco IOS SSL VPN licenses for this? http://docs.aws.amazon.com/AmazonVPC/latest/Netwo...
I need to enable the DefaultL2LGroup within Tunnel Groups in Site-to-Site VPN on our 5510. Will this cause any issues, outages etc. I am always cautious about enabling policies on the ASA
Hi, Remote site connected via VPN l2l IPSec 5505, AP works fine, I upgraded the ASA to 5506x and the AP will not work with WLC here is the debug output *Dec 29 20:53:09.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.1.98...
Hello, I have 2 sites : site A : PIX 515E VPN gateway for remote users LAN 192.168.10.0/24 site B : Sonicwall NSA 2600 LAN 192.168.1.0/24 Both sites are connected through a site to site VPN. Remote clients (PPTP/VPN client) can connect to Site A L...
Hi, We have configured our ASA to send email alerts for events such as login's, it works fine between our ASA and the email server that is reached through the "inside" interface, however we tried to configure it for another ASA at a remote site that...
Hi, If i am using free vpn software , i am getting good connection . At the same time cisco vpn (ipsec )very slow still using old client I have not tried ssl vpn or anyconnect client . Please help Thanks
I have a VPN tunnel that's coming up ok, capture shows the traffic hitting the inside interface, but nothing is getting to the next hop. When I do a packet trace the traffic fails: QUI-GHP-VFW-001-2# pac input outside raw 172.17.60.134 1 8.39.192.13 ...
Hi, I have an ASA 9.1(5)21 and I'm trying to setup SDI authentication with an RSA 8.1. When the primary server falls down the replica doesn't respond. This is the error I get: "ERROR: Authentication Server not responding: No error" When listing the S...
Hi, Do anyone have best mapping drive script that could share with me? Something like .bat executable file for windows which execute after a successful VPN connection and maps shared network drivers to users computer? Please forgive me to ask this qu...
Based on the documentation and info from major certificate company, entrust verisign etc. it should work for v 8.2.3.9 and Higher I have upgraded from 8.2(1) to 8.2(4) but still showing ERROR failed to parse or verify imported certificate, same prob...
I have a VPN Tunnel established between an ASA5508 and a Sonic Wall (not sure of model). So far I have been unsuccessful in pinging either from my local network or the remote network. What am I missing? Remote Sonic Wall settings:Remote IP Address: 7...