Update - We have completed the relabeling project for the wireless board. We will be lifting read-only mode today the Sixth of May. Thank you all for your patience and feedback. We are approaching our latest step in relabelling posts across the Sma...
Forum Posts
Hello! This sticky-post will serve as a sign-post for incoming community members. Below you will find links to pages that you may find helpful. Virtual Assistant- Discover support content and options for your gearSupport page index - Contains a ...
Hii recently bought some Cisco Business AP 140ac as a good solution for small offices.After zero provisioning, AP (master) is working good, and i was trying performance with default config.I found that my Xiaomi Mi9 can't connect. Using android debug...
Hi.We have 4 pcs WAP121 access points setup in a cluster (single point of setup)Are the cluster setup compatible with new access points?If so what kind/number?Or do we have to change all of them/replace them, to extend the the range?
Hi, I looked brochure for WAP 150. but can't see DHCP server functions.Does WAP 150 supported DHCP server functions?
having booting problem in my 2AP's model: WAP321, please support.
Hello, I have create a Cluster with 6 x AP541N-E-K9.Each AP I have set on a fixed Channel with one channel space. 1,3,5,7,9,....I have approx 15 Android mobile clients which are connected to the AP. Currently I have problems with a little freeze of ...
I use a Cisco router DPC3848VM and am looking for a compatible WiFi extender for my home. Best, --giri
Hi guys, I have started with the administration of the CUCM Call manager in my company. We currently have CALABRIO for recording calls, but new stations that move to Jabber are not recording. The licenses have been assigned correctly and the Jabber...
Hi everyone,This is my first time configuring WAP581, I need your help!Both ports are connected to the POE switch, but only a 169.254.163.211 address is displayed through the packet capture, and FINDIT has not been able to find any device. The device...
I am looking at other options for access points and wanted to get a feeling on what people thought of the 240AC for an access point? I am looking at having multiple SSIDs, VLANs, and a guest portal. I am hoping to hear about multiple APs in a single ...
I've gotten fed up with the firmware problems in my UniFi AC AP Pros, so I decided to experiment with a CBW140AC-B as a replacement in my home network.I installed one last night, with four WLANs (using VLANs) and the same SSIDs/WPA2 passphrases I had...
My WAP581 has been quite unreliable since the beginning of its life. The longer it has able to live without a reboot is one month.Quite often, it freezes with no apparent reason. Clients may or may not stay connected, but when they stay connected the...
Hi all, In WAP371, under Single point setup -> Channel Management. there is a features call "Automatically re-assigning channels". According to manual, when I enable it, the WAP will auto look for a most least congestion and best channel in every 1 h...
Hi i have a problem with my brand-new cisco wap571. I connected the wap to my poe switch Netgear GS728TP if i connect it to a standard poe port 802.3af it works fine but if I try to connect to a poe+ port 802.3at it powers but it doesn't boot well,th...
Wap150 refuse connection on 2.4G. No problem connecting 5G. But my PC and other device can’t connect 5G. No problem with my old WAP121.what can i do?Ferruccio (Italy)
Hello, I hope somebody has a solution for the issue I am facing. I have 2 WAP150's, both with firmware 1.1.2.4, and I am not able to save a specific change. Under Wireless > Radio > Advanced Settings > Legacy Rate Sets I can unselect rates that I don...
