Dear, I have a wireless lan controller (AIR-CT5508-K9), I have a WLAN with a captive portal and many network users. The problem is that I have a maximum of 2048 entries in the database, and I currently have 1949 entries by network users. Is there any...
Forum Posts
Hi In WLC, there are some rogues AP showing on Monitor page. Based on that info, can we know where these AP are physically connected to? Thank you
Resolved! Central DHCP - WLAN Mapping
Hello everyone,I'm having a problem with a flexconnect configuration and would like your opponents.I need to enable the Central DHCP - WLAN Mapping feature, so that users of some remote locations receive the address provided by WLC, but when the clie...
Good morning, everyone, I'm installing a vWLC with 3 AP 1240s and I'm trying to make my DHCP server assign addresses based on the VLANs I've configured in my WLAN. Currently, it is the AP who give addresses in the subnet where the AP are. For exemp...
Hi, I currently have 2 WLC 5508 in High Availability in the version 7.4.121.0 controlling 3602 APs. We got new 2802 APs with version 8.4.100.0 (They have Mobility Express Image configured as NOT Mobility Express Capable, so they work as CAPWAP and th...
Can we transfer existing AP licenses we have on a Cisco AIR-CT5508-K9 can be transferred to an AIR-CT5520-K9.
Hi guys. I have setup cisco 877w connected in non root bridge mode to other non cisco wireless N router (I don't have administrative access to it). I'd like to disable B mode at 877w router and increase link statility Current configuration: =======...
Hi We have two ssid. Both have been configured with "All" in Radio Policy(WLANs ---> General ----> Radio Policy ----> All). but on user side(by command netsh wlan show interface), why one ssid is only having a band while the second ssid is only havin...
is it possible to join cisco aironet 2700 series access point with Cisco 3650 catalyst switch
We have run into issues where only few clients cannot associate to our corporate SSID. Debug synopsis below Aug 08 11:55:18.039 *apfMsConnTask_3 Client made new Association to AP/BSSID BSSID a0:23:9f:fa:d5:62 AP NZCHC5NET55 Aug 08 11:55:18.041 *apf...
Hi all. I'll try to keep this simple. Using a 5508 WLC with HA, and 2702i AP's I am trying to configure a flexconnect AP to be used on a site which whilst it has routing back to us we do not manage. This means I have no control over the VLANs o...
Resolved! 40/80Mhz channel with 2802e on 2504 WLC
Hi, we just deployed a new infrastructure based on 16 2802E APs on a 2504+HA WLC in Local Mode with RRM configured both on 2.4 and 5Ghz. WLC is v. 8.5.131.0. I have selected on the DCA on 5ghz these options DCA5ghz Unfortunately, even aft...
Re: 5508 WLC Tx Power Control(TPC)- High Density Deployment My Client's WLC is globally set to Fix AP power level to level 1. Is it possible to change this setting on an AP Group basis? Want to auto adjust power for a certain location. I have crea...
situation is a 3850 and a 2504 on the same LAN. The 2504 is connected to the 3850. there are 30 APS in the network and 9 of them cable directly to the 3850. The 2504 AP management VLAN is 253 and the 3850 is configured as 254 whenever wireless mana...
Ucraíno Inglés --------------- Detectar idioma Acerbaixano Afrikaans Albanés Alemán Amhárico Árabe Armenio Bengalí Bielorruso Birmano Bosníaco Búlgaro Canarés Casaco Catalán Cebuano Checo Chinés (simplificado) Chinés (tradicional) Cingalés Coreano Co...
