Welcome to the Cisco Community Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, September 14, 2026 through Monday, September 28, 2026. Our experts Shree Hari AB and Suman Sinha wi...
Hi All, I have configured two WLC 2504 (Primary/ Secondary - Standalone) with two SSID. one SSID - works with PSK key. Primary WLC is working good. Secondary one SSID is working good and another SSID is not getting IP to connect (Works with PSK)....
Team, I am deploying 54 3802i AP's on cisco 2504 wlc and want to get the best performance possible and wonder if, I deploy the AP's as flexconnect will give me any benefits of local switching performance boost instead of tunneling back to the wlc 1GB...
Is it possible to run a mesh using Mobility Express on the AIR-AP1562D-S-K9 ? Or is a controller required? Thanks
Hi, At a number of our sites, we disable 2.4GHz and have both radios running on 5GHz. Recently we are seeing the dual band radio cycling to channel 36 and locking on there. Eventually all 3802i AP's have the second radio locked to 36 and there is s...
Hello All, I am planing for wireless migration from CAPWAP to flex-connect, we confused for few things. We have 1 central and 4 remote sites currently working in CAPWAP and client broadcasting 13 SSID into almost all APs. Now they want me to mo...
hello can anyone help me with a particular scenario i am up against. we have multiple office in different cities, all connected via MPLS circuit...would i need a LAN controller each site or just on central with HA?
I bought some new AP 2800. The AP is saying it's supported by controller version 8.2.102.2 or newer. I check the release notes for 8.x version there is no direct path to upgrade from 7.5. Is it possible to upgrade from 7.5 to 7.6, then 7.6 to 8.0 and...
Hi, I have a problem. I know these info: After SSO is enabled followed by the WLC reboot and XML configuration is synced, WLC 1 will transition its state as Active and WLC 2 will transition its state as STANDBY HOT. From this point onwards, the GUI/T...
Hello, I have bought AIR-AP1852I-H-K9 from IT salesman and i could not connect to my AP. I can connect using serial port, but the web login is not responding? Any idea how to connect my AP and configure it using Cisco Mobility. Sorry I am GEEK, Thank...
Today, we found below: fwcore/sec/act# sh proc u cpu-us nonPC Thread 5Sec 1Min 5Min Process0x0000000000c0256c 0x00007fffdb3233a0 0.1% 0.1% 0.1% ARP Thread - - 36.7% 35.5% 38% DATA...
Hi, i have problem with direct meraki to my own splash page. When user connect to Wifi, this page apear and when click Connect button, the page go to ps://n70.network-auth.com/splash/?ac=ACB%3ABC%3A32%3A6D%3A1E&real_ip=10.1.35.32&client_ip=10.163.148...
Hi, I have a 7510 wlc that produces the following output after entering the "show boot" command: (Cisco Controller) >show bootPrimary Boot Image............................... 8.0.132.108 (default) (active)Backup Boot Image............................
1.1.1.1 is now a legal address.Should we still be using 1.1.1.1 as the Virtual Interface on the controllers?Does this mean we need to go back and change the Virtual Interface on the controllers?http://www.packetlife.net/blog/2010/feb/5/ripe-plays-wi...
I have activated the GPS stream on the 829 and can internally reverse telnet to it while in on the console. However, connected to one of the Ethernet ports, I cannot create an active telnet (or other session type) to the port (2007 for TTY, though I...
Hi All When deploying access points, what are the typical distances in an open office for both bands to achieve good coverage, say -65db I hear normally around 45 meters between access points normally? cheers
