Wireless

Hi  I hope you can help, can you please advice what the best way to calculate the no of APs required for lets say 200 users with 2 devices per user. Please let me know what formulas would apply. many thanks

I am trying to configure a wired guest vlan in a site that does not have a local wireless controller.  I was hoping to use the 3850 as the local controller to anchor to a 5508 that is in the DMZ.  I have two 3850s, so could configure one as MA and th...

HI Experts , I am having 2 cisco 2504 WLC with 7.6 code . i need to configure HA in my network Can anyone tell the  license requirement and the procedure to do the same  I have got several documents related to HA for 5508 but not able to find any for...

Is there a way to prevent LWAPs from joining a controller?   I know I can change the primary controller config on each AP, but that would only affect the APs that are online when I make that change. I need to make some pretty extensive changes to a c...

I've literally tried for hours trying to tftp the Mobility-Express AIR-AP1850-K9-8.1.122.0 to a brand new Aironet AP-1852i-B using the procedure found at: https://supportforums.cisco.com/discussion/12677751/cisco-ap-1852-unable-convert-new-lightweigh...

Hi,   We are trying to set up a Wired Guest Access solution based on the infrastructure: Converged access (sup8/3850) as Mobility Agent (MA) CT-5508 as Mobility Controller (MC) CT-5508 as Mobility Anchor (on DMZ) There is a Switch Peer Group (SPG) on...

Hello!I have received a new WLC2504 for my lab, which is nice....  What's not so nice is that I get a mysterious error message on the console. It appeared when the wizard started at first boot and it apperars at every startup since. I have gone throu...

I have a 2504 WLC with 3602 APs and have tried configuring FastTransition 802.11r but I am still suffering from disconnects using Skype, Viber, SIP when roaming between APs. Obviously, my limited knowledge in configuration is the problem. Can anyone ...

Hi, how can i change unit of measurement from feet to meters in MSE 10.2? thank you.

Hi, how can i change unit of measurement from feet to meters in MSE 10.2? thank you.

hello  i convert 1602i to lightweight but didn't join WLC 5508  the ap has IP  and it can ping the wlc  but the WLC cannot ping ap or i can't see the ap join stats  wlc : show sysinfo Manufacturer's Name.............................. Cisco Systems In...

Team, Need a a technical support that says that the AP 2702 works fine with the power injector 5, eventhough in the datasheet the power injector recommended is the power injector 4. I have tested it, and works okey. Thnks!