Wireless

Hello, if you are receiving your SSID at a good strength e.g. -40dbm, but there is another SSID broadcasting on exactly the same channel, will this degrade your signal notably ?I can see in Inssider that my SSID, plus the competing SSID both have app...

Hi Guys, we have setup flexconnect for our offices with head-office having the primary and backup controller and all remote sites ap's in flexconnect mode. The employee ssid's for remote offices authenticate using the remote radius/ias server in the ...

Hi everyoneI would like  a Question About Flexconnect HA N+1 After WLC 1 Down and AP go to Joint WLC 2-Cisco WLC 8500   =  2 unit  version 7.6.130.10-Mode Flexconnect     HA  N+1-AP Joint WLC 1 and 2  mode HA N+1   I would like After WLC 1 Down is AP...

Hi all, Can I configure Aironet Air-AP1041N-E-K9 to work with controller? ThanksSefi

I have a 5508 core WLC with a 3850 as the local controller for an AP3G2-K9W8-M Access Point.  The 3850 and the core WLC both have the wireless guest WLAN configured.  My client can see the wireless LAN.  When it tries to connect, it fails. Can you gi...

For network design ,is there any best practice or recommendation for installing MSE  , is there any problem for installing MSE & WCS/Prime inside datacenter behind firewallOR it is better to install WCS/Prime & MSE beside WLCs without firewall Thanks

anyone have experience issue Cisco AP & qualcomm atheros qca61x4 wireless network adapter SPEED ISSUE ?? i tested Cisco autonomous AP(1142) and LAP(1142) with WLC(5508) both .there is icmp loss when i click internet url.  and very slowly.but other de...

Hi, I have a problem with jabber for android, my device is a samsung s4, when i receive a call the audio is poor for the first 3 seconds. There is a parameter to customize this delay? on iphone i haven't this problem, audio is perfect without delay. ...

I would like to have a separate SSID on my autonomous aironet 1141 so that guests in my home can connect to my network without me giving out the password.  I am not very experienced with cisco ios so if someone could either point me in the right dire...

Hi folks, Has anyone managed to put a wildcard cert on a 7925G (or 9971) to use for client authentication with EAP-TLS?  It seems like one is forced to use the MIC or a cert from a csr generated by the phone... but I'd really rather not keep track of...

How do I troubleshoot a 7925 G wireless phone connectivity issues.  Dropped words and phrases, cutting in and out?

its work slow and keep disconnect i need any update?