Wireless

I setup NPS server and added a RADIUS Client access point, my project is to get a wireless user to authenticate using his/her AD credientials, my problem is i can't seem to authenticate my usermy NPS server is giving me this error log under Event Vie...

I'm trying to convert a bunch of 1231access points to lightweight mode using the Cisco Upgrade Tool 3.4. They all went fine, until one failed to convert. The output of 'show log' on the AP shows an error, "CA Cert not yet valid or is expired" and it ...

I have WLC 2504 running     7.4.100.0 with a single 1242AG AP single wireless SSID on the WLC an Apple AIRSERVER and an IPAD which should be able to do mirroring to show ipad screen on the pcthey have IPs in same subnet and have base connectivityit j...

Hello guys,Does the 3502e and 3602e have dual-band omni-directional external antennas that can be mounted on the wall?I have been searching the net, but all I could find was the wall mountable single band antenna and it was only for 3502e.Thanks

                   Hi, Just a questions concerning multicast over wireless. We have remote AP;s homed back over a WAN to a WiSM running 7.0.253. we see an multicast  stream develope between the edge router and the group address but is the multicast t...

It happens on a regular basis, that our checkpoint firewall blocks control path traffic (UDP 16666) with the reason 'old UDP session'. When this happens our guest clients lose internet access. The connection restores only after I manually send a seri...

While looking at client information from a pair of controllers on our NCS (version 1.3.0.20) I see what amounts to 53 different "Unknown" vendors listed among the clients.  My question - Is there any way to update the OUI Vendor data in NCS to reflec...

Hi wireless experts,today I come around with a weird request. Let's say I'm collecting "show controllers" outputs from Aironet 1552E outdoor APs for the 2,4GHz and 5GHz radio interfaces from different regulatory domains (weird what people collects no...

I am working with a WAP321-A-K9.I enable the bandwidth utilization function of my ap, set the maximum utilization threshold to 30%, then my laptop is unable to  associate with the ap,while  at the mean time there is no other associated cilent. I wond...

                  Hi AL,,Please help me with the command in order to display the IOS version of WLC 5508

I am working with a 2504 WLC and 1142 WAP. I have a couple deployed out to remote offices across the country and would like to turn them on only when I need them. Seems if I turn the admin status to disabled, it also disables the radio and you cannot...