Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 17 , 2026 through Tuesday August 31, 2026. Our experts Saikat Nandy and Prashanth Bargur Hanumantharayappa will be waiting to assist you and resol...
Will you still be able to do point to point and point to multipoint bridging with the new 1600 and 2600 SAP's? I'm not finding any documentation that says you'll be able to do it.
Hi,After a device has authenticated to the wireless network using dot1X, how often are the WPA2 keys renewed by default?Thanks, Pat.
Couple questions on setting channels on Cisco 1552s. First off almost all locations are fibered and set as RAPs. It doesn't allow me to set the channel assignment method to "global" to use DCA. It says it can't be done for a mesh backhaul AP. Is ther...
I have Eight AIR-AP1242AG-E-K9's accross our site that have 2 SSID's and 2 VLAN's that work well, I want to link one of the AIR-AP1242AG-E-K9 to another one using 5ghz patch antennas across a 50 metre gap, but I am puzzled on how to do this, as to cr...
I'd like to share with everyone our article which covers the configuration of Cisco's popular Aironet Access Points.The article includes detailed diagrams to ensure all necessary information is present and understood. We provide full configuration an...
What is the difference between WIRELESS LAN LWAPP and WIRELESS LAN LWAP RECOVERY images? I believe the RECOVERY is used in the upgade process - but what is the other used for?
I have a Cisco Wlc 4402 , denon 3312 & AP 1142 all three devices are same subnet . But Airpaly not showing in Iphone. But if i put a Airport express in on these subnet then i find airplay option. Give me some idea how without Airport express i can e...
Hi,Is there any available cisco aironet model which enable administrator to configure the strength of the WiFi wireless radio signal? Example, we can tune to 10dB, 20dB, 30dB and yet maintaining the throughput (10 Mbps, 25 Mbps)TQ
Dear all,Hi,I have got a second hand Cisco Aironet 1131AG Access Point from USA.I am living in another country and would like to know if there is a way to update this device, so instead of only supporting channels 1-11, I could also utilize channels ...
Folks,Have a controller based depolyment with (2) 5508s and an 1121 ACS appliance running 5.1 code. Controllers are setup identically and we are radius authenticating users to AD via the ACS. Everything works great on the primary controller, but when...
Hello, i want Download the Cisco Spectrum Expert v4.1.11. No Download with a valid Service Contract! in the past, you needed no service contract for this download. I have a original Spectrum PCMCIA Card. Can everybody post this File for my?Thanks
Dear forum members this is the issue.When we were installing some new APs, were plugged in to ports that were not configured on the WLC management VLAN.This is the illustration WLC management VLAN is VLAN 80Management VLAN of infrastructure (Switches...
Hi All Just wanted to know if someone can explain or link me to an article that explains how to hide Wireless SSID via Wireless controllers (one I am using is 5505)Currently anyone can attmept to login to it as i cant find any options to hide it! Scr...
Hello all,I am new to Cisco wireless products, so forgive me for my newbie questions.I currently have a Linksys WRT150N acting as my wireless core (I know, I cannot change it at the moment)We recently took over a second floor in the building and we w...
Hi All, I'm trying to set up WLAN Configuration templates on our new NCS server. The version of NCS is 1.1.1.24 and the version of our WLC is 7.2.103.0. I have two problems:1. I do not see an option for AAA Override. Has this been renamed to som...
