Wireless

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

review


Labels

Forum Posts

Hi ,I've a number 1242AG APs that i want to reconfigure. These APs were in use before but i've reset to factory defaults on NCS.When i console into the APs now, using independant power source, and try to paste in my config i get"ERROR!!! Command is d...

Hi All, Below  is bridge configration .  I would like to know with this below   configuration data traffic will get compelete encrytion ?? any better  encryption configuration  ?? as I read wpa will not provide complete  encryption. please helpnetwor...

Hello,I have Cisco Wireless Controller 2500 series (AIR-CT2504) and 10 LAPs implemented in my office building. I need to enforce security policy.I have few questions below regarding the Wireless controller 2500 Series- Please advice.1)  Can i enforce...

Is there a way to get notified when a specific rogue SSID is detected on the network using the 5508 controller? If not, could this be done if we were running WCS?

saleff by Level 2
  • 689 Views
  • 1 replies
  • 0 Helpful votes

I have bought multiple WAP121 units and would like to know the best practices for layering these units to create a unified wireless network. Can anyone assist me in doing so? Thanks,Stew Ives

stew.ives by Community Member
  • 824 Views
  • 0 replies
  • 0 Helpful votes

Hi All,I've got a deployment of 1142N APs using a pair of 5508 controllers running 7.3.101.0.  We're in the United States and the country is set to "US".  I've added the UNII-2 channels to Auto-RF on the controllers via "config advanced 802.11a chann...

abelletti by Community Member
  • 5978 Views
  • 9 replies
  • 0 Helpful votes

Can anyone help me with sources of configuration for 802.1x authentication Aironet 1130AG? I want to configure 802.1x authentication certificate-based machine (Windows XP and 7), is this possible?The access-point is operating in standalone mode and t...

I have a 1231 high in a warehouse that needs converted to Autonomous mode.Please tell me if this will work:From the controller, revert the ap to a previous release not in LWAPPWait for AP to pull DHCP to GUI into, configure from there.Is that the bes...

waller.brad by Community Member
  • 671 Views
  • 1 replies
  • 0 Helpful votes

I have a 5508 WLC and some 3502i CAP.I have configured a guest SSID with no encryption and Web Authentication.If an attacker client use a spoofed mac address of a client correctly authenticated he can access without any authentication.Is there anythi...

Gabriele01_2 by Community Member
  • 1625 Views
  • 3 replies
  • 0 Helpful votes
Review Cisco Networking for a $25 gift card